Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Starting a discussion on finishing walnut

Posts

Re: Starting a discussion on finishing walnut

#26

Re: Gunstocks

John in NM

Yup, went and looked at their website just now while waiting for my stippling tool to cool off. Nice linseed oil color, from the sound of the instructions I bet its not thinned either.

Re: Starting a discussion on finishing walnut

#27

Re: Some practical experience

John in NM

Yeah, never seen a surplus stock that had a smooth finish unless it was issued - oiled and handled daily for a year or two is almost as good as 220 ;)

These were German surplus G3 stocks from the 1960's. Quick soak in a thinned oil with horrible red dye in it. Stocks were mostly birch rather than walnut, but with all that nasty dye you can hardly tell. Some are excellent condition surplus but very dry - never issued I'm guessing. Others are beat up a bit but with a nice film of dried oil - probably issued, used & oiled often, then surplussed when the Germans went to plastic in the 1980's.

Some of the nicest military stocks I've seen were on Swiss K31's - and even those can have cross grain sanding, albeit of a reasonably moderate grit (120 or so). Armories are/were generally less interested in aesthetics, as you point out.

Re: Starting a discussion on finishing walnut

#28

Re: Maloof

TomD

Can't see any reason to do anything other than Maloof on table tops in general, and on walnut. The guy was a legend, it worked for him.

I have never bought the pre-mix which I don't regard as authentic. You can find plenty of info on it on the net.

I assume this is his son's work:



In some of the pics he has an open pore look, but it fills easily. And I suppose one can't be sure this is the finish.

Really durable, cheap, and easy to apply finish. Not dead clear though.

Re: Starting a discussion on finishing walnut

#29

Re: Maloof

TomD

I should say it is easy to apply in a home shop. There is hand work involved, so in a commercial setting something else would be good.