Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Zinsser Shellac Problem

Posts

Zinsser Shellac Problem

#1

Zinsser Shellac Problem

Bill Tindall, E.Tn.


I opened the can to do some finishing and look what I found. The can coating had delaminated. We shall see what Zinsser will do about it. Anybody have Zinsser contact information?

Re: Zinsser Shellac Problem

#2

Julian

Re: Zinsser Shellac Problem

Julian

There should be a phone number on the back of the can. Or search on the internet.

Re: Zinsser Shellac Problem

#3

Keep Breathing

Mark Mandell - Gone Round In New Jersey

I had gotten a can of SealCoat for finishing. Must have been old stuff as it wouldn't dry hard. Sent them email and called (left message). No response.

Pitooie!

Re: Zinsser Shellac Problem

#4

Re: Zinsser Shellac Problem

Michael Dresdner

https://addresscustomerservicecenternumber.com/1800-Customer-Service-Contact-Number-of-Zinsser/

Re: Zinsser Shellac Problem

#5

thank you and follow up

Bill Tindall, E.Tn.

I own this can of shellac because the last can rusted and I had to discard it well before using it all. Never had that happen previously. Now this one has its protective finish delaminate. The shelf life of the shellac now exceeds the shelf life of the can! I think Zinsser has a can supplier problem.

I made contact with this lady- Sarah.Laster@rustoleum.com-. She asked that I send a picture and a refund would be sent to my shop. She did not ask how much I paid for the material but she was aware that I bought it at Lowes. It will be curious to see what the refund is.

In the mean time I have bought yet another can and this one was promptly transferred to a glass gallon jug.

Re: Zinsser Shellac Problem

#6

Re: thank you and follow up

Hank Knight

I've not had the protective coating delaminate, but I have had a Zinsser can rust through and leak Seal Coat all over a bunch of stuff. What a mess! I now decant Zinsser shellac and Seal Coat into dark glass jars for storage. No more messes.

Re: Zinsser Shellac Problem

#7

Flakes

Brian Holcombe

:D

Re: Zinsser Shellac Problem

#8

Re: Flakes

William Duffield

After two cans of SealCoat sprung leaks and glued themselves to the shelf, I get my shellac only in flake or powder form and keep it refrigerated. The bottle of Everclear is a lot easier to clean up than premixed shellac: just sweep up the broken glass after it has evaporated. DAMHIKT!

Re: Zinsser Shellac Problem

#9

Re: Zinsser Shellac Problem

roger lance

I've not had any of the problems discussed concerning Zinsser shellac.....but after reading this, I placed my can in a plastic container.....don't need the potential mess. :(