Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

13 Mar 2017

Good Morning Everyone,

It's been a really tough week of oncall duty for the day job. 3 hours sleep since early Saturday morning and I'm past exhausted.

Nothing going on in the shop at the moment, been helping the LOML with an upholstery job for a friend. And still learning how to cook when time permits on Saturdays.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Kevin French

Caned the first of several canoe seats. The seats are made old whiskey barrel staves and the stretchers are cut from the barrel heads.

 photo P1240637.jpg

 photo P1240633.jpg

Re: WC Weekend Accomplishments....

#3

An addition to the family.

Mark Nowicki

Rocky, a young (18? month) lab mix, courtesy of the Montreal SPCA.


Re: WC Weekend Accomplishments....

#4

Finished a present

Denny

I finished this box, a birthday present. I'm really enjoying some smaller projects, a good way to use up scraps and not as much of a time commitment.






Re: WC Weekend Accomplishments....

#5

Really?

Bill Tindall, E.Tn.

" not as much of a time commitment"

That lovely box looks like a lot of time to make to me. I find that the smaller the project the more demanding it is to make look good and that box looks very good. Did you come up with the attractive design?

Re: WC Weekend Accomplishments....

#6

Re: Really?

Denny

Bill, I think it's quicker for me because the scale of the project can simplify the joinery. And even if you choose to complicate the joinery, you're only looking at a few dovetails or M/T joints. But I agree, you have to slow down a bit to make the details really clean.

The design is mine, went through 3 false starts mid-build and finally got lucky.

Thanks for the kind words.

Denny

Re: WC Weekend Accomplishments....

#7

Re: Really? Echo Bill's comments!

Henry (Raleigh NC)

Ditto Bill's comments - That is both wonderful design and execution.

I find the design phase takes most of my time. The time for actual fabrication doesn't seem to make much difference for large or small projects; the number of pieces and the joinery choices obviously does matter. Aside from time in sanding (i.e. tasks proportional to area), this piece would take me as long as a coffee table, unless the table were so large that I would have to jig up additional material support (i.e. in or out feed table on TS or BS) to machine large pieces.

Well done, thanks for the inspiring pic. I am always drawn to intriguing and well done boxes. I may use that for design inspiration; it has been a while since I have made a box.

Henry

Re: WC Weekend Accomplishments....

#8

Re: Really? Echo Bill's comments!

Denny

Thanks, Henry. I think you're right about design time taking up a large part of the project. I've come to accept the fact that I'm really not very good at designing until the project gets underway and I can actually see things coming together. As a consequence, I end up modifying designs up until the very end. I suppose I could make small scale models to help, but I don't have the patience.

I'm just getting started with boxes, and finding them a lot of fun to make. I've got several more on my to do list.

Denny

Re: WC Weekend Accomplishments....

#9

Re: Finished a present

Joanne in Point Pleasant, PA

Lovely! The recipient will love it, think it took ages, and won't care about the time or that it is "scraps".

Re: WC Weekend Accomplishments....

#10

Thanks, Joanne!


Re: WC Weekend Accomplishments....

#11

Good for you!

Jim Dillon

Rocky, a good looking dog, has found him/herself a good home. Your pic made my day. Thanks. Jim

Re: WC Weekend Accomplishments....

#12

Beautiful box!

Jim Dillon

Denny, I wish I had your talent for design! What is the medallion made from? Are the legs/inlay ebony, walnut, a stained wood?? Did you use the hinges (Brusso?) with the built-in stop?

I'm with Bill on "small" projects. I've built several jewelry boxes and a humidor. It seemed like I fussed more with those projects than larger stuff. Maybe it was because I could hold them up in my hands for a closer visual inspection and saw every joint imperfection. And installing hinges isn't that easy either - at least for me. Thanks for posting. Jim

Re: WC Weekend Accomplishments....

#13

Re: Beautiful box! *LINK*

Denny

Thanks, Jim.

The medallion is a 50 mm mother of pearl disc from Australian Mother of Pearl Co. They seem to have reasonable prices and shipping is pretty quick and not too expensive. The fit was perfect for a 50mm forstner bit.

The legs and pull are traditional ebonized walnut (vinegar and steel wool). The stripe is inlaid ebony. (I didn't think the stain of ebonized walnut would be deep enough to survive sanding flush with the box top.)

The hinges are Brusso JB-103 with built-in stop. Installing the hinges is actually really easy. Start with a template like the one linked below and you can use a 3/16" bearing guided bit like Amana's 47222-S and it becomes really quick and painless.

The box is lined with Thai Mango paper from Dick Blick Art supplies.

Any more questions, feel free...

Denny


template

Re: WC Weekend Accomplishments....

#14

Thanks...

Jim Dillon

Denny for the tip regarding installation of the hinges, as well as the other info. Keep up the excellent work! Jim