Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Woodworking in Chicago?

Posts

Woodworking in Chicago?

#1

Woodworking in Chicago?

Bill Tindall, E.Tn.

Will be visiting Chicago soon, driving from Louisville. Any woodworking interests along the way or in Chicago?

Any interesting restaurants in Michigan Ave vicinity? Will eat at Frontera.

Re: Woodworking in Chicago?

#2

Re: Woodworking in Chicago?

roger lance

There usually was a Lie Nielsen Hand Tool Event in Chicago in mid April.....but a check of LN site only shows events in March.....so, I'm unsure if this is scheduled or not.

At any rate, Chicago is no place to be an out-of-towner who has become lost.....be careful.

Re: Woodworking in Chicago?

#3

Re: Woodworking in Chicago? *LINK*

Dick Coers

Quite a bit north in Winnetka, but I love Sawbridge Studio.

Make sure to get some Garrett's popcorn on Michigan Ave, get the Chicago mix.

There's also J. Miller, never been there, so don't know if he is open for a tour.

http://www.furnituremaking.com

Oak Park was on my bucket list for the Frank Lloyd Wright studio. A wonderful place to visit, take the studio tour and if possible the neighborhood tour.

http://flwright.org

It might be worth the stop if you need a break on I-57 around Champaign, Il. A nice selection of tools, since it's a Rockler associate store you get a broad selection of misc, but not strong on wood. It's not far off I-57, but you'll need navigation to find it the first time!

http://cuwoodshop.com/home.php


http://www.sawbridge.com/email/default.asp

Re: Woodworking in Chicago?

#4

I have work at Sawbridge

Thomas Skaggs, Foothills of Mount Level

I'm smiling Bill. You have seen my work in Asheville and now you will be all the way up in Chicago and still see my work. Ha ha!

T.

Re: Woodworking in Chicago?

#5

Frank Lloyd Wright Home and Studio

Stephen F Roth

Frank Lloyd Wright Home and Studio. 20 minutes outside Chicago. The work is amazing. A lot of furniture and fixtures and a great tour. Not that expensive.

I spend a lot of time in Chicago, and that is a highlight.

Also, the Art Institute has a decent furniture collection. (But if you can only do one, do the Frank Lloyd Wright Home and Studio Tour.)

Re: Woodworking in Chicago?

#6

You're into food, right?

Tim Greif - West of Chicago

There's so many good restaurants, it's hard to make a recommendation. I worked in the loop for 39 years. But every foodie I knew loved going to Eataly, just to look around at all the stuff. It's a block west of Michigan ave on Ohio St. They have high end stuff and probably every food preparation implement you can ever imagine. You can eat there too. But at least take the time to cruise through the place.

Re: Woodworking in Chicago?

#7

Lumber company.....

roger lance

might not be on your route, but my favorite wood supplier is Frank Miller Lumber in Union City, Indiana.

Re: Woodworking in Chicago?

#8

Re: Woodworking in Chicago? *LINK*

Thomas Skaggs, Foothills of Mount Level

Bill,

The Art Institute is very worth the visit. I looked on their site. They have a small exhibit on Shaker made things. But aside from that, world famous art and design.

If by chance you go after April 1rst, I highly recommend the Chicago Architecture Foundation river cruise tour. It's awesome.


Architecture Cruise

Re: Woodworking in Chicago?

#9

It's #1 on my list

Bill Tindall, E.Tn.

When I taught in Chicago last time I stumbled into Eataly a couple of hours before leaving Chicago. I spent at least a half hour taking baguette making with a baker there. Didn't have a chance to eat there then, but we did in Munich. We are staying just a few blocks away on Ohio.

Re: Woodworking in Chicago?

#10

Re: I have work at Sawbridge

Bill Tindall, E.Tn.

It was a must stop when it was downtown, but it and Mosher have moved. I hate driving in city traffic. I enter Chicago late on a Sunday and leave late to avoid most traffic. Will not likely go North only to return to go south.

Re: Woodworking in Chicago?

#11

Avoid most traffic, LOL, that's a good one!

Dick Coers

Our son lives in the Albany Park area in North Chicago. No such thing as avoiding traffic, ever! Unless by late you mean 2-3:00 am. Good traffic flow up there is when you never have to go slower than 10mph.

Re: Woodworking in Chicago?

#12

Re: Avoiding Chicago-area traffic

AZ in Colorado Springs

Last month I drove to MI. To avoid the traffic around Chicago, I went by way of Indianapolis instead.

Re: Woodworking in Chicago?

#13

Racing around Indy on I-465 is hair raising


Re: Woodworking in Chicago?

#14

Re: Frank Lloyd Wright Home and Studio

GolfSteve in Calgary

Agree about the Frank Lloyd Wright home. It's a nice tour (book the tour ahead of time).

The Art Institute of Chicago was also a fun museum to visit. My memory is a bit fuzzy, but I recall some furniture exhibits.

I had a couple of good meals at "Hugo's Frog Bar and Fish House" - the downtown location. Had a good vibe, live piano, and good food.

Re: Woodworking in Chicago?

#15

Lobby of the Chicago Tribune

GolfSteve in Calgary

The lobby of the Chicago Tribune building is something worth visiting for a reminder of what freedom means.

I only had a short visit to Chicago. Wandering around gazing at the incredible architecture was a highlight. I just happened to walk into the Chicago Tribune building lobby to get a tea in the attached teashop, and spent about 10 minutes staring in wonder at the engraved wisdom.

Re: Woodworking in Chicago?

#16

Re: Woodworking in Chicago? *LINK*

clay foster

The decor is funky, but the food is great. Get the lamb chops.


Sayat Nova

Re: Woodworking in Chicago?

#17

thanks

Bill Tindall, E.Tn.

it is a block from where we are staying. Will do lunch or dinner there. I like trying ethnic food.

Re: Woodworking in Chicago?

#18

That's nothing compared to the Eisenhower at 5:00p


Re: Woodworking in Chicago?

#19

Re: That's nothing compared to the Eisenhower at 5

Dick Coers

Try driving into downtown at that time. I drove in to get our son back to work, ONCE. It was like an evacuation alarm had been set off! The sidewalks were filled and people were also walking in the street. Each intersection gets a traffic cop, and he yelled at me to turn. Where? It was either run over somebody, or run into another car. He just kept yelling, so I edged in. Then I was stuck on a bridge over the River. I could feel the bridge oscillating to the cadence of the people. I had a flash back to a Myth Buster Show. It was actually relieved to be on the grid locked Eisenhower. I wasn't moving, but I didn't have to worry about cars AND people. Same goes for getting on a commuter train at that hour. They don't have guards shoving people into the cars like in Tokyo, but they could use them. That's about the time I start begging my kids to move.