Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

removable dividers in dados?

Posts

removable dividers in dados?

#1

removable dividers in dados?

Joseph Piotrowski

greetings,

i will be making several wall mounted shop cabinets and i plan on making dado's along the vertical and horizontal sides to be able to divide up the interior for tools.

id like the dividers to be removable in case a i want re-configure the interior. i also don't want them to easily fall out while using tools.

i'n unsure how to achieve this so id thought i'd ask for some help with a solution.

TIA,

Joe P.

Re: removable dividers in dados?

#2

Re: removable dividers in dados?

John McGaw

I've never done it but my guess is that strength would be a concern. Consider, for example, if you had a horizontal shelf made of 3/4" stock and there were regularly spaced 1/4" deep dadoes top and bottom. That leaves you with 1/4" of material to support whatever weight you are placing on the shelf. Not a big deal if you had the vertical dividers in place underneath but surely not a good idea if you will be placing heavy tools without the dividers in place. I guess you could go with shallower dadoes but it would be difficult to get even 1/2" of remaining when using 3/4" stock although I guess you could go to thicker material. The actual act of making the cabinet with such dividers would be rather trivial as long as you have a good proven method of cutting the dadoes in the first place as you could cut them in bulk and at one pass to ensure the alignment would be perfect -- I'd probably go with a router and clamped fence but your method would depend on your tools and experience.

Re: removable dividers in dados?

#3

suggestion

Bill Tindall, E.Tn.



Son in law just completed this storage cabinet, not bad for a first project. I would suggest something like this with pin holes drilled on the sides to accept self pins for adjustable self spacing. If it gets too tall you will need a center fixed shelf for stiffness.

I'm not sold on the need for adjustable vertical dividers but if this feature is a must then do a partial height divider dadoed into a removable strip that would sit on the shelf. I have done something similar for storing cookie sheets.

Re: removable dividers in dados?

#4

Re: removable dividers in dados?

jessecloud

If these are "utility" as opposed to "fine furniture" cabinets, you can simply hold the dividers up with screwed in cleats. Then just unscrew and reposition to adjust.

Re: removable dividers in dados?

#5

Let Norm be your guide.....

roger lance

Go to YouTube and look up How To: Build a Workshop Hutch Parts 1 & 2.

Part 2 is a redoing of his wall tool/supplies storage unit with removable dividers.....you can't do better than watching the master.....

Re: removable dividers in dados?

#6

Re: Shelf Pins

William Duffield

Shelves in non-glued and pinned dados significantly weaken the cabinet. Empty dados are even worse. (CDI would love those cabinets.) Shelves glued into dados significantly strengthen the cabinet. If you use shelf pins for adjustable shelves, at least stiffen the cabinet with one or two fixed shelves glued into dados (or better yet, but much more difficult to install, sliding dovetails).

Re: removable dividers in dados?

#7

thanks for the ideas

Joseph Piotrowski

thanks everyone. lots of good stuff to think about.

Re: removable dividers in dados?

#8

the back is important

Bill Tindall, E.Tn.

A glued in back will substantially stiffen the cabinet but not prevent vertical component bowing. However, I doubt bowing would be a problem on a 4' height (bowing isn't visible on my 8' high units made of 3/4 pine with a fixed middle shelf ).

Re: removable dividers in dados?

#9

Re: removable dividers in dados?

Jim Dillon

Joe P. while having future adaptability is laudable, my experience has been that few changes are made (maybe due to simply laziness) once all the tools etc. are in their originally designed space. If changes are made, my experience has been that the tools etc. are rearranged, rather than the shelves themselves - within reason of course. Pay more attention to GOOD planning where your tools will fit in your cabinet and I bet you won't change much in the future. I agree with all the other posters regarding the limited strength of the crosscut and vertical grooves/dadoes - especially vertical - you are contemplating.

Case-in-point: I built all my kitchen cabinets with multiple holes for shelf pins at various heights. Really thought it was a super idea to have all this flexibility for future rearrangement of the shelves. Never happened! Once all the stuff was in, I haven't changed placement of the shelves in 17+ years. Again, good planning ahead of time really helps out. Jim

Re: removable dividers in dados?

#10

same experience

Bill Tindall, E.Tn.

My "adjustable" tool shelves got adjusted upon installation and remain the same 23 years later. That said, there was some initial adjusting so the feature was not wasted, and the shelf where my glue is stored is going to get raised because the new bottle doesn't fit.

Re: removable dividers in dados?

#11

Re: the back is important

Joseph Piotrowski

thanks. these will be 2' tall 18" wide. or at least close to that. bowing shouldn't be a problem.

Re: removable dividers in dados?

#12

Re: same experience

Joseph Piotrowski

i guess making it all adjustable is the lazy mans way of doing it. in some cases(no pun intended) cordless tools can change a little but not much. i can just make them more generic.