Re: oscillating spindle sander recommendation
Ray Newman
Bought the Delta BOSS unit not to longer after it was introduced.Heavy and does not vibrate around the work table.
As another posted, 'nevva' found a non-tilting table to be an issue.
Have not used it a great deal, so I can not speak for its longevity.
On a few things I found the longer stroke advantageous. At one time I made 2-3 auxiliary tables from 3/4" to fit over the cast iron table to take advantage of the unused portion of the sanding drum when smoothing thinner stock. Found this easier than removing and turning the drum upside down and putting it back on. Bottom auxiliary table held in place by rare earth magnets, then the other(s) screwed to it via countersunk screws when needed.
One thing that I can not emphasize enough -- good dust collection is a must!



