Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Thoughts on Ash wood

Posts

Re: Thoughts on Ash wood

#26

Re: Thoughts on Ash wood

William Duffield

Another "issue" with ash, if you want to build A&C furniture with it: you can't fume it with ammonia to darken it, like you would oak. You can get around this problem by pretreating it with tea or some such to add tannin.

Re: Thoughts on Ash wood

#28

Re: Thoughts on Ash wood

Larry Clinton At Frankfort, (Central) Indiana

Richard, you always produce beautiful work. I certainly am not in your category, nor pretend to be. I personally like to build using very little or no stain, letting the wood speak for itself, although I will tint Oak to bring out the figure. My chosen woods, Cherry, Walnut and Oak are my personal preferences, although I have done some work in Eastern Red cedar, Locust, and Red Elm. I do think the European preference is for lighter woods than the USA generally likes

Re: Thoughts on Ash wood

#29

Re: second growth ash

John M in Mid Mich

Here in mid-Michigan elm trees are quite common, but mostly now a smaller tree although the occasional harvestable one does survive. On my place, they mostly get 6-12" diameter before they succumb to disease. The hope, of course, is that one of these will be the mutant with resistance and elm will come back to full glory. I had a few larger trees that died when I first moved here in the early 90's that I was able to salvage and mill in mostly 8/4 planks and slabs and these are in the shed awaiting my retirement. Ash may end up the same: plenty of saplings and small trees just mature enough to produce seed, but dying before sawlog sized. I have a stash and love working with it more with each project.