Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

TS throat plate question

Posts

Re: TS throat plate question

#26

Re: The thing to remember....

CharlieL

John, I've had my chances to buy a cabinet saw. I could of bought my fathers when he hung up woodworking a couple of years ago, and lately my local internet classifieds are full of deals on them. It's just not a necessity for me. Sure it would be nice to have a large dedicated shop with a bathroom, a wood storage room, etc. and filled with impressive stationary machinery, and just be able to turn the lights on and go at it, but unfortunately I don't have it, nor will I ever have it, unless someday I find a way for it all to pay for itself. I don't see that happening anytime soon, or ever in this country anymore. So I make do with our double stall garage that we still park our vehicles in.

Re: TS throat plate question

#27

Re: The thing to remember....

John in NM

It wasn't a necessity for me either, just about $100 cheaper than a retail contractors saw at the time. If I were buying retail I'd have gone with the contractors saw, easy decision at about 1/3 the price.

Same reason I've not replaced the jetlock fence on the cabinet saw - it works well enough that the price of a fancy fence isn't worth it. I'd still like an old unifence, but its not worth the $$$$ to track one down and buy it.

Re: TS throat plate question

#28

Re: The thing to remember....

CharlieL

If I remember correctly my fathers Unisaw also still had the Jetlock fence. When I bought the Contractors saw I bought it new from ACME Electric locally. It was a 34-445X package deal, 34-441 saw, 30" Unfence, and full size mobile base. I've never regretted that purchase, it's been all the saw that I've ever needed. For some there is an extra expense to purchasing a cabinet saw if they don't have 230V in their shop. I think that there are a few people out there that stretch the truth about things, table saws and dust collection probably has been the most debated. For instance you probably know my involvement with dust collection. You get these people that insinuate that you have to get every spec of dust, it's unrealistic, your not going to get it from every machine, period. I try to be honest and realistic about things and not make questionable claims, and what really frustrates me is that I still have to do it because there is so much BS out there and it really bothers me every time I see it. Another point is woodworking is declining in this country and everyone wants to make it less affordable for anyone that may want to get into it. As you pointed out, you got a deal on your Unisaw. Over the years I've gotten some pretty good deals also. A lightly used WAP shop vac, and a RBI scroll saw, neither I could of afforded new, nice machines and I feel fortunate to have them, but I certainly don't expect everyone else to have them.

Re: TS throat plate question

#29

Re: The thing to remember....

William Duffield

I got a great deal on my fingers. My parents didn't pay a penny extra for them. Replacement cost, however, would be astronomical. You can't buy them on eBay or Craig's List or at an estate sale. The incremental cost of a saw that won't remove them is insignificant, especially if you can work a deal with your insurance company.

Re: TS throat plate question

#30

Re: PVC TS throat plate

Stuart Johnson

Just stumbled on this one using pvc and 1/2" plywood:


Re: TS throat plate question

#31

Wow!  I had no idea

jessecloud

that PVC could be made that pliable.

Sounds like it might have lots of uses.

Can you bend it to a tight curve?

I'm thinking forms, jigs, etc.

Re: TS throat plate question

#32

Re: PVC TS throat plate

Joseph Mulherin

That is exactly what I did and tried to tell you people about using PVC for the plate. Mine does not have to have the wood installed underneath, and I have several plates of pvc for my various blade cuts.

Cost is only for the pipe.

Re: TS throat plate question

#33

Re: Wow!  I had no idea

Bruce, a MN Galoot

Yup. It's very flexible when hot. I Medea several repairs to the cracked fairing on my old motorcycle using that technique.

Re: TS throat plate question

#35

Re: Wow!  I had no idea

John K Jordan

>>>that PVC could be made that pliable.

Sounds like it might have lots of uses.>>>

I've bent PVC water pipe to fit using a heat gun. You can also stretch or compress a pipe opening with a wooden mandrel.

Bill Pentz, in his dust collection documents, describes how to cut and shape PVC to make fittings, wyes, and other custom DC ductwork things.

JKJ

Re: TS throat plate question

#36

Re: make it

Larry Clinton At Frankfort, (Central) Indiana

Yup, I made several a few years ago, still have some. I can't remember exactly but do remember I glued some formica to some scrap birch plywood I had, then using the plate traced the outline on the formica. I cut an 1/8 or so outside the marks with my bandsaw, then clamped the original plate to them and using a template pattern router bit trimmed them to size. Then I undercut them on the cabinet saw with a dado blade so the regular blade cut the last 1/4" inch or so. I don't do the final cut until I need to use them. I installed socket screws in the area where the orginal plate was supported as well as a couple on the edge so I can adjust out any play.

Once adjusted they fit tightly in the table of my Unisaw.

I have some cut at 90 deg with a straight blade as well as a couple with dado slots. I also have some at 45 deg and one or two at an odd angle (can't remember what I used them for).

As I had all the material on hand the cost was zero and really didn't take a lot of time ~ as I recall I made a dozen or so all in one afternoon (after the glue for the formica had set up for a day or two. Took longer to install the set screws and adjust them than anything else. They fit better than the original plate!