White oak crest and arm deck, hickory spindles, hard maple turnings, big leaf maple writing surface, Eastern white pine seat.
Note about the spindles. They were actually turned. An outfit from England (Ashem Crafts) makes a lathe trapping plane. I roughed the spindles and finished the bases and then used the trapping plane to thin and taper them.
I typically use my spindle roughing gouge and rough between a live center and a chuck. After it is cylindrical and getting near the maximum width, I go ahead and shape the lower part (which has a lot of taper). I then use a parting tool or bedan to get some "marks" for the rough diameter. I do use a steady for this part.
I then move the tail stock and live center out of the way.
I like the chair. Different style on the lower spindles. I haven't seen that before. Nicely done. I need to make a writing-arm chair one of these days. Your methods are interesting. thanks for posting.---Jack
It has the potential to be a clunky kind of chair, but the beautifully tapered and thin spindles make it seem very light and almost delicate. Thanks for sharing.