Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

NEW Shop Shot - #967

Posts

NEW Shop Shot - #967

#1

NEW Shop Shot - #967

David Yoho

Alan Young sent in this newest installment of Shop Shots. It shows a mill drill he picked up and made several modifications to so it now has a depth stop.

Use the link below to see what he did.

Cheers,

David Yoho

Editor - Shop Shots



NEW SHOP SHOT!

Re: NEW Shop Shot - #967

#2

Alan...

John K Jordan

Nice job! This is especially interesting to me since I am rebuilding an older Rong Fu in pieces in my shop right now. A friend bought two of these years ago, the RF-30 models with power down feed, and recently gave me one. I'm ripping out the power downfeed, replacing bearings, etc. I have a lathe and a smaller mill which are handy for making a few replacement parts!

One thing my friend did to his which helps a lot (without a DRO) is make a simple bracket and mount a 2" dial indicator on the front with a magnet. This gives him very precise Z indication which is more reliable and easier to read than the indicator dial.

I'm anxious to get this together and in use. This one is a model with the longer table so it will have more X and Y travel than my Little Machine Shop HiTorque mill. The thing is no Bridgeport but it is, as you already know, massive and quite sturdy.

It's surprising how useful milling and welding is to a woodworker/turner! (and a farmer)

JKJ

Re: NEW Shop Shot - #967

#3

Re: Alan...

Matt Robinette

Nice modification