Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

screeching table saw

Posts

Re: screeching table saw

#26

Re: No....

William Duffield

Sometimes, for many reasons, they don't want to tell you what's in it. ("Tung oil" and "pork and beans" come to mind.) Usually, though, you can search the web for the product's name, the company's name, and the term "SDS" or "MSDS". Then you can read the Safety Data Sheet (or obsolete Material Safety Data Sheet), and it will often tell you what the specific chemicals are. PTFE is a fluoropolymer, (C2F4)n.

Re: screeching table saw

#27

Re: Grex 2" ROS

John K Jordan

>>Does your compressor cycle on and off or just stays on to keep up?

Stuart,

Running the Grex ROS or another 3" palm ROS I just got causes the compressor to cycle. I didn't time how long between cycles.

BTW, I've been quite happy with this compressor. The 5hp motor drives a two-stage compressor and pumps the tank to about 160 psi. I regulate to 90 psi just after a water separator and desiccant dryer. I have lines plumbed inside the walls to eight outlets in and outside the shop.

JKJ