Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

oil change tip

Posts

Re: oil change tip

#26

Re: The Topic

John in NM

So basically, you are equating the use of slightly less viscous oil as bar oil and what? If this is to be condemned as irresponsible, surely you can provide an example of a practice of similar scale that did actually result in a problem.

Bill maintains that the quantity is so small and so dispersed that it will make no difference whatsoever, and you maintain that no quantity is too small to make a difference - is this about right?

There are very few examples I can think of that support what you are saying, though they do exist. Trouble is that they don't correlate, because you would have to have 30% or more of the population logging as a hobby in order to get the same kind of scale that causes the problems.

Re: oil change tip

#27

Got Nothing To Do

Mark Mandell - Gone Round In New Jersey

with his chainsaw. Nor is it about Bill, himself. It's about doing what we can, where ever we can, to minimize our impact and break the chain of past practices that got us where we are with polluted air and water.

We have a lovely small river that runs through our town. There are measurable amounts of prescription drugs as well as agricultural chemicals in the water. I have several Superfund sites within 3 miles of my home. Former manufacturing sites where people didn't care when they spilled solvents and chemicals on the shop floor; they just rinsed it out with water. After all, the Pacific Ocean is huge, so what if there's a patch of floating garbage the size of Connecticut out there? Kilauea volcano pumps thousands of tons of toxic sulfur dioxide gas into the air each and every day, so why should I, 8,000 miles away, be concerned about whether my car is running properly and the catalytic converter is working?

The thread started with a rather nifty way of capturing and using the maximum amount of oil in the containers, not in a chain saw, but rather for lubrication of an engine for which it was "designed." From the economic standpoint, the user saves the same amount of money because he has to buy less motor oil and uses less oil to lubricate his saw because he needs less oil to lube the bar with the heavier formulation so less oil is thrown off the moving chain.

Bill made the point of adding a bit of water to the shampoo bottle to get the most usable product out of the container. I've done that very thing for years. I do the same with the mustard and catsup bottles, saving the thinned product for sauces.

When I need to use mineral spirits, naptha, or other diluents or solvents to clean brushes or tools, the used stuff goes into a jar to let the material settle out so the product can then be reused at least once. It's last stop is the hazmat recycling day that the county runs 3 times a year. I could just as easily pour it out in a pan and let it evaporate. After all, what difference does my pint of paint thinner make in the ocean of air above me? Besides, the jet stream will take the vapor to Europe, so it's not my problem, right?

Of course, you're entitled to your different view. Perhaps your part of New Mexico is on the western side of the Continental Divide so your bar/chain oil will drain the other way.

Re: oil change tip

#28

Re: Got Nothing To Do

John in NM

"Of course, you're entitled to your different view. Perhaps your part of New Mexico is on the western side of the Continental Divide so your bar/chain oil will drain the other way."

Yet you open with "this has nothing to do with Bill's chainsaw"... sigh. I am on the east side of the divide for what it's worth. But everything around here drains into the Tularosa Basin, which has no exit, so you're safe from my tiny amount of (Stihl) bar oil. I use about a gallon in two to three years.

Yes, the prescription drug example was one I did think of wherein tiny quantities multiplied by millions have a noticeable impact. You have not made the case, however, that a few extra ounces of bar oil will make a discernible difference over the few ounces that are there just from use. The reason you need to make that case is that bar oil is used on a vastly smaller scale than are prescription medications.

You too are certainly entitled to your opinion. You are not, however, entitled to the only opinion, and relying on sentiment and the attempt at guilt tripping will only convince the choir.

Want to talk about something that matters instead? Like preventing large scale pollution, or whether nuclear power is really worth the risks? There you and I will likely agree.

Re: oil change tip

#29

Chain 'Stretch'

Tom Dunlap

My S key ztickz...not bad zpelling...zorry :(

Uzing the word 'Ztretch' here izn't the bezt. Don't think of bar chain like a zlinky.

Az the rivetz wear the holez in the linkz elongate. Add 0.0001 of wear timez 80 rivetz and you have to adjuzt tenzion often.

Blown and embedded in the bark iz rough on a cutting edge. Worze than on the rivetz.

Re: oil change tip

#30

thanks.....

Bill Tindall, E.Tn.

I always wondered about the cause. Sometimes near the end of the chain life a link must be removed.

Re: oil change tip

#31

Sorry

Mark Mandell - Gone Round In New Jersey

I don't, as a rule, go off on a rant (at least not here), but a proverbial nerve got pushed this time. There is so very little that any one of us can do to address the mess we've made of the only place we have for our species to survive, the frustration born of seeing the day-by-day degradation of the planet through human action and inaction got the best of me last night.

I had no intention of doling out "guilt" or making a value judgment about anyone here. If my comments were taken that way, I apologize.

Re: oil change tip

#32

Re: Chain 'Stretch'

John in NM

I could never figure out why they "stretch" so fast out here, until I read of one or two possible causes - one being that the grit I mentioned gets into the bar channel and causes extra drag on the chain - like cutting really hard wood does. The drag supposedly elongates the holes in the drive links that those rivets go through.

I'm going with that one for now, since it doesn't surprise me to wear chains out fast cutting juniper, but pinon is not especially hard wood and the rate of wear is about the same regardless of what I'm cutting (usually its a mix, but I had a lot of recently dead pinon to clear one summer and the trend was the same).

Its possible that it's all just a bunch of snake oil though :D

I used to take the chains in to get them shortened, but now I just buy new ones for the little saw - $12 from Bailey's for a 55 link chain, cheaper than having them shortened and maybe easier on the sprocket too.

You're right though - its worse on the cutting edge. Usually have to file the chain every time I refill the tank when cutting that stuff.

Re: oil change tip

#33

Re: oil change tip

John K Jordan

Hey, I've been doing the cheap funnel trick for years!

It is spring oil change time here at the farm. I have nearly a dozen machines that need changed. The tractor is the most fun - about $400 for oil and filters and a couple of hours of exercise.

JKJ