Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

I need display cabinet (China Cabinet) inspiration

Posts

Re: I need display cabinet (China Cabinet) inspiration

#26

One more thought *LINK*

Craig Thibodeau

Since you seem to be intrigued by more Krenovian designs you might want to cheeck the College of the Redwoods website, they have a good portfolio of past student work in the cabinet department.

Craig


College of the Redwoods student portfolio

Re: I need display cabinet (China Cabinet) inspiration

#27

Ellis Walentine

Floor joinery

Ellis Walentine

Bill, if you make a floor that is 1/2" wider and longer than your bottom rail openings, you can run a rabbet around the bottom edge to create a tongue at the top edge, to mate with grooves all around your rails. At the corners, just cut your shelf off at 45º and cut corresponding notches in your legs to receive the corners.

Ellis

Re: I need display cabinet (China Cabinet) inspiration

#28

Re: One more thought

Bill Tindall, E.Tn.

I have been to the school on several occasions and studied the "yearbooks" as well as chatted with enthuiastic students. I even partially funded a student one year but that didn't turn out well. I check the student work occasionally. Seems the new design person is broadening the style there some, a good thing I think.

Will check FWW issue. Thank you.

Re: I need display cabinet (China Cabinet) inspiration

#29

Lots of great advice, but one suggestion. *LINK*

Keith Newton

I've not done any cabinets in the size and scale for what you are after, but one thing I've done that I really like is to use leaded beveled glass panels, which are the same height as your glass shelves behind them. Besides the lead line hiding the edge of the glass, the refraction from the bevels make the glass shelf disappear, making the object inside appear to float in space.

Of course, I've had the good fortune of a good friend in the stained glass business gave me a few thousand bevels, all the same size that he picked up in auction, then wished he hadn't. Also, my older sister does stained glass, so I have recruited her to do the leading from time to time. But I have done the lead part myself too, so you might like adding that skill to your bag of tricks as well.

If you shop online, I'm sure you can find a source for bevels that can be put together to come out pretty close to the size your thinking. But I would suggest you get the glass and assemble them before actually making the door to fit the glass it.

This would also allow you to add a slight bow to the front if you want to entertain that thought.

The GOAL I try to achieve during the design phase on a project like this, is not to make a piece that screams "HEY LOOK AT ME" when someone walks into the room, but quietly seduces you over a long period of time. This hopefully will keep these pieces in the living space of their owners, instead of down in the basement or up in their attics, where they go to die a slow death.


https://www.flickr.com/photos/7391658@N03/9205909204/in/album-72157633084082109/

Re: I need display cabinet (China Cabinet) inspiration

#30

that took a while to figure out!

Bill Tindall, E.Tn.

Then I realized it was something I was contemplating to hide the bottom to rail joint.

Re: I need display cabinet (China Cabinet) inspiration

#31

Re: engineering question

AZ in Colorado Springs

I made a mission style living room table for my daughter two years ago. The legs were 1-1/2 x 1-1/2 inch posts and the front and rear stretchers were thru tenoned, end aprons simple M&T. I used cleats as Alan shows to support the lower shelf (resting loosely on the cleats). The shelf is notched around the legs. Top of shelf sits 1/4" below the top edge of the stretchers.