I am delighted with how the top turned out. I wasn't satisfied with the color after the first coat of varnish. I added a "walnut" colored glaze and then top coated over it. The glaze added some color and depth.
I think it's Latin, and the plural of patera. In furniture, paterae are the oval patterns inlaid into the tops of table legs in Federal period furniture.
A few examples:
This one also illustrates stringing, banding and bell flowers.
If you want to learn how to make them, Lie-Nielsen publishes a DVD on the subject by Steve Latta:
A closely related definition refers to decorative architectural carvings that appear on such things as Greek temples and Federal and Classical period doorways and mantles.
side note.....Interesting the difference in the appearance of the legs with it right side up and upside down. You posted a picture of it upside down while finishing it. It looked like the legs were entirely too fat. Not so. Right side up, it looks perfectly proportioned.
I didn't want to take a chance on the legs so I mocked up the skirt and legs. As usual I guessed to big and shrank them an eighth from my first guess. Even at that their apparent size changes with viewing angle. They look fine straight on.
I had seen them before assembly and even right side up and they looked fine. But when I saw the table up side down, the difference was shocking. Obviously it was some sort of foreshortening trick in the photo. It looks fabulous finished.
I know what you mean about the mock up and taking an 1/8" off the legs. I always try to make them too fat to start. Must have something to do with my "engineering" brain.