Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Blotchy Stain...

Posts

Blotchy Stain...

#1

Blotchy Stain...

sean maloney

So, I'm refininishing an old dresser that I bought on Kijiji. I realized it's pine when I stripped off the old finish. I restained it only to find the stain going on blotchy. I figured it was just old stain so I went a couple shades darker and restained. Same thing happened. I went to the internet and found out I should have pre-sealed the wood. Most of the dresser is perfect but three drawers are blotchy. Today I re-sanded the three blotchy drawers again to lighten the stain. I'm hoping that I can seal them and then re-stain. Does this sound possible?? I'm new to this and have never dealt with this issue. Any other suggestions????

Re: Blotchy Stain...

#2

Re: Blotchy Stain...

don stephan

It might be difficult to seal and re-stain just 3 drawers and have a result similar to the rest of the dresser. Better to sand all of the surfaces equally.

One way to get a more even color is to use either a conditioner, a glue size, a thin (spit) coat of shellac, and there are probably others. Another option is to use a gel stain; since it doesn't penetrate the wood much (if at all) the resulting color is more even. A third approach is to spray the color and let dry without touching it, and then spray a sealer to lock it in.

Different approaches work better or worse in different situations.

First step is to get some pine practice boards for your experimenting.

Re: Blotchy Stain...

#3

Use a gel stain.