John, I can't tell when I read this, < Actually, I think that was exactly the right thing to do based upon the appearance of the heartwood of that tree. > if you are saying THAT in agreement with me or Bill.
I have ripped down a lot of big Oak logs with my chainsaws which were too large to go onto my Woodmizer as you describe your friends doing. It will cut 28" between guides. It only takes me about 15 minutes to rip 12' with a 32" bar. With a really large tree, it can all be turned into quartered and rift. I love getting QS boards 20" wide.
What I was trying to say, rather clumsily, is that the appearance of the dark heartwood would be out of keeping with the intended use of the stock. Even a drawer side deserves good even wood. That, and the sometimes-great differences between heart and sapwood while drying and undergoing seasonal changes suggests that getting rid of the heartwood before proceeding is a good idea. I'd suspect that exposing the extra stock to the atmosphere would also speed and even the drying process somewhat.
I regard drawer sides as a functional item and don't pay much attention to color. If they plane easily during fitting I am happy. I'm not making studio furniture for a gallery.
Sides are frequently resawed so what ever pattern they have is symmetrical to their neighbor in the billet. I orient in the grain in the side in its most attractive orientation. Sometimes I get a dark streak on one edge. With the dark streak oriented on the bottom of the drawer it looks fine or even attractive.
What I hoped to accomplish was to show that something useful could be easily, let me repeat easily, salvaged from firewood, in this case drawer sides. I have gotten several favorable comments off line along the lines of "why didn't I think of that" so the effort to post was not wasted.
For those that didn't like my approach, suggest your alternative, explaining the objective and advantages.
I've often used 'firewood' as turning stock. This has the advantage that, should the result not please me, it can still be burned and the dried shavings used as kindling. No waste beyond the time involved...
As one who has quite a bit of experience burning firewood I found Poplar (around Indiana known as Cottonwood) to have a great use. I burned wood in both a good wood stove and an antique rebuilt "Pot Belly" stove exclusively for over 7 years to heat my large 1880's home. Around here I had access to some great burning woods including Ash, Maple, Cherry, Hackberry, Black Locust etc. I also had access to large amounts of Sycamore. I would never recommend using Sycamore as a firewood source unless you have access to a heavy duty power Log splitter, but found it to be excellent firewood after drying for at least 6 months to a year.
In my experience I found burning the more dense woods in the late spring and early fall to be a problem. When the temperature outside was in the 40's and warming to the 70's during the day, a small load of "good" wood required shutting down the dampers on the stoves to keep the house temperature down during the day. This resulted in cleaning my chimneys several times as they would quickly load up with creosote when the wood smoldered in the stoves. Poplar worked great during those times. I could easily build a quick fire with it, in a half hour my home was warm and in a short time the wood was gone.
My burning wood was an economic necessity as my wife and I were raising six children (mine, hers and ours), had a home with bad windows, no insulation etc. It had 3 "Floor furnaces" which were in bad shape and extremely high gas bills, During the years I burnt wood, I installed all new windows and doors, insulated the home, resided it and installed a high efficiency furnace, all without borrowing money.
I certainly agree. Bill, I understood your objective and it sure seems to me you achieved it in the quickest time and least work. You and I are in area's with plentiful timber, so some "waste" of usable wood is not a great concern as it is to others with limited supply. As to splitting wood with a chain saw lengthway, that can be a real task and quite hard on a saw. I did have an occasion where I had to do just that for a poplar that was 40+ inches in diameter. We had downed the tree and started loading my truck but when we got to the larger trunk sections we found they were way to heavy to load. Rather than cut them into 12" length's I split them into 2 pieces (each probably still weighed over 200 lbs.). Took an hour or two to split about 10 sections with my largest (36") saw. I had to resharpen it a couple times during the cuts. Splitting makes much more sense, however I did not have my mall or wedges with me.
What you describe is exactly the destiny for this poplar- quick starting short fires more for ambiance than heat at daughter's house.
Personally I don't use it. I have an open fireplace that I like to use without a screen when we are in the room. Poplar tends to POP! sending embers flying out of the fireplace. But it does split nicely.
I am often confused when people discuss polpar. Is some parts of the country (like here), "poplar" means Yellow Poplar/Tulip Poplar (Liriodendron tuplipfera).
To other places, "poplar" means something entirely different (Poplulus alba, etc.).
I don't have experience with the cottenwood "true" poplars but I understand they is quite different from tulip poplar. I love the wood from tulip poplar and use it for many things. I understand it is widely used in furniture making. I have many tulip poplar trees here on the farm, some well over 3' dbh, and saw for lumber or firewood when one needs to come down.
I assumed the topic of this thread was tulip poplar. (I don't know if cottonwood is even used for drawer slides.) It would help everyone to make that clear when discussing poplar.
I remember a confusing conversation where two people were at odds due to the misunderstanding! Duh.
I burn tulip poplar often and it burns well, even though it is lower density than oak and hickory. I read once that all dry wood contains nearly the same BTU content for the same weight. BTW, cocobolo burns beautifully.