Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

A perfect resaw. Yeah, right.

Posts

A perfect resaw. Yeah, right.

#1

A perfect resaw. Yeah, right.

Tom Pilsbury (Chicago)

I need a lid for a small box I'm making so I pulled this nice piece of mahagony out of my stash and set up the bandsaw for a resaw cut.

Wood is approx. 5 1/2" x 10". 1/2" Timberwolf blade


Wow! Look how good it came out. I really impressed myself. I'm getting pretty good at this woodworking stuff.


Yep. Too good to be true. I should have known.


Arrrrrgggh! Biscuits! I didn't realize it was a leftover piece from an edge glued board from a long ago project. It will be inside the box so I guess I can still use it. I'll just call it a "design element". :)

Re: A perfect resaw. Yeah, right.

#2

Re: A perfect resaw. Yeah, right.

roger lance

I am impressed with that resaw.....about as good as can be done.....maybe your planer could remove all traces of the biscuits and leave you with enough thickness.

Re: A perfect resaw. Yeah, right.

#3

Re: A perfect resaw. Yeah, right.

William Duffield

Just one more reason you don't need biscuits for edge joining panels. In this "application" a Domino has zero advantages over a biscuit. DAMHIKT.

Re: A perfect resaw. Yeah, right.

#4

Re: A perfect resaw. Yeah, right.

Tom Pilsbury (Chicago)

Too short for the planer. Manual states "never plane material shorter than 14 inches". I'll hit it with a hand scraper and sandpaper. Maybe that will do it.

Re: A perfect resaw. Yeah, right.

#5

Re: A perfect resaw. Yeah, right.

Barry Irby

In this "application" Both biscuits and Dominoes have a serious advantage over Kreg screws. I guess there is no chance you would have "not seen" the Kreg screws, but if you run your best blade through a biscuit or Domino you get to keep on using the blade. Not so much with a Kreg screw. DAMHIKT

You could glue longer "rails" on the edges of the pieces and run them through the planer. Let them stick out the front and back about three inches and they eliminate snipe on the work piece.

Pretty resaw though.

Re: A perfect resaw. Yeah, right.

#6

Blame Norm

Thomas Skaggs, Foothills of Mount Level

When I started out, some 20 years ago, I took Norm's queue to use biscuits to edge glue panels. Somewhere along the way a sage woodworker clued me in to the futility of such practice.

I have butt glued thousands of panels ever since an have never had a joint fail yet. No biscuits necessary!

Sorry about your "discovery".

T.

Re: A perfect resaw. Yeah, right.

#7

Time

Mark Mandell - Gone Round In New Jersey

to learn to inlay dutchmen.

Re: A perfect resaw. Yeah, right.

#8

Re: A perfect resaw. Yeah, right.

William Duffield

And if you are using a SawStop and hit a Kreg screw, there's a good chance you'll trip the brake, too, for another $80 "Aw, Crud!"

Re: A perfect resaw. Yeah, right.

#9

Important Disclosure

David Yoho

No real Dutch men will be harmed in the process ;) ;)

Sorry, couldn't resist!!

Re: A perfect resaw. Yeah, right.

#10

must have been a good looking joint


Re: A perfect resaw. Yeah, right.

#11

Actually it is perfect...

John in NM

Bet you couldn't do that if you were trying to - I know I couldn't! :D

Those biscuits just serve to display excellent technique, put a frame around it and hang it on the shop wall!

Re: A perfect resaw. Yeah, right.

#12

Use a sled...

John in NM

You got two pieces after all :D

Piece of plywood under both with a cleat on the end, or just with some sandpaper glued to the face.

I'd still hang that on the wall though :D