Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Helical Head Carbide Inserts

Posts

Helical Head Carbide Inserts

#1

Helical Head Carbide Inserts

William Duffield

I recently acquired a Powermatic 15HH 15" Helical Head planer. It appears to be a knockoff of the Grizzly G0453PX, but in a Grey Poupon color scheme.

It is second hand, and the spare inserts are missing. Does anyone know whether the Powermatic cutter head is a Shelix head made by Byrd? If not, does anyone know where I can locate replacement inserts for it? Powermatic's documentation is unclear, and except for the part number they provide no specs for the inserts in their documentation, and their asking price seems pretty steep compared to other carbide inserts of similar size and shape.

Re: Helical Head Carbide Inserts

#2

Re: Helical Head Carbide Inserts

Paul Cates - Henderson, KY

I don't know for sure, but if the head looks like the ones on shelixheads.com, then I would bet it's a Byrd. The Byrd shelix cuts at an angle and the Grizzly cuts perpendicular to the feed direction. This is the Grizzly one: http://www.amazon.com/Grizzly-H7655-Indexable-Spiral-15-Inch/dp/B000E305BC

Re: Helical Head Carbide Inserts

#3

Re: Helical Head Carbide Inserts

William Duffield

Of course, I was being a bit facetious about it being a Grizzly knockoff, but the drasticdifferences between the Grizzly head and the one in my Powermatic are very enlightening. While I can't find any branding on the head in my planer, it does look very similar to the picture of the Byrd H7768 head on the Amazon website. The only obvious difference is the markings on the inserts. The PM head has the numbers 1 through 4 marking the four edges, while the Byrd inserts show only one mark on one corner.

Re: Helical Head Carbide Inserts

#4

Re: Helical Head Carbide Inserts

Dick Coers

I thought the Byrd head used an insert with a shallow arc on it, grizzly used straight edges. Not for sure, just from thinking I read it somewhere. Knockoff, that's funny!

Re: Helical Head Carbide Inserts

#5

Re: Helical Head Carbide Inserts

Matt Robinette

I bought this last winter, Powermatic 1791213 15HH 3 HP 15-Inch Planer with 230-Volt 1 Phase Byrd Shelix Helical Cutterhead.

Re: Helical Head Carbide Inserts

#6

Re: Helical Head Carbide Inserts

William Duffield

Yes, mine has the arced cutting edges (similar to a camber on a hand plane blade). The Amazon photo of the Grizzly head shows straight cutters, and no skew either.

Re: Helical Head Carbide Inserts

#7

Re: Helical Head Carbide Inserts

William Duffield

That's the same model number and stock number as mine. There's just no mention of "Byrd" in the user manual. ereplacementparts.com also doesn't call the part a Byrd, but states that the manufacturer is Powermatic. Powermatic's website doesn't produce the part when I search for the head's part number, 1791211. All that obfuscation is why I figured I'd better double check here.

Re: Helical Head Carbide Inserts

#8

Re: Helical Head Carbide Inserts

William Duffield

Do you think I paid too much? I could have gotten a new Grizzly for the same price, and I wouldn't have had to drive all the way to Boston to get it and bring it home. ;)

Re: Helical Head Carbide Inserts

#9

Re: Helical Head Carbide Inserts

Paul Cates - Henderson, KY

Maybe the newer ones don't have the numbers but the cutters on the Byrd in my jointer have them.

Re: Helical Head Carbide Inserts

#10

Re: Helical Head Carbide Inserts

William Duffield

Thanks, Paul. That's exactly what mine look like. Now, I know i can order replacement inserts that fit the Shelix heads, and they will fit mine. I also noted that the Byrd Machinery site stated that all their heads use the same inserts, so when I get around to putting one in my jointer, I won't need to keep two sets of replacement inserts.

Re: Helical Head Carbide Inserts

#11

Talk to a carbide vendor...

John in NM

I'd be willing to bet that all the cutterheads use some variety of off the shelf inserts. All you need is a metric micrometer and some vendor advice to get replacements.

Re: Helical Head Carbide Inserts

#12

Re: Talk to a carbide vendor...

sje-tools

The Powermatic HH does certainly have a Byrd helix head - I've sold inserts to folks with the same thicknesser.


img

Re: Helical Head Carbide Inserts

#13

Re: A couple more variables

William Duffield

The thousands of different shapes, sizes, materials, grades and manufacturers of inserts that are made and sold is totally beyond my comprehension. I'm just going to have to buy them from Byrd or Walter Meyer, or from an Amazon vendor who swears they'll fit Shelix heads.

While looking for carbide inserts, I found another complication. When installing them, you need a torque wrench, but not the one you'd use for head bolts on your 442 Hemi; something smaller and lighter, measuring in inch pounds. Byrd specs 45-55 inch pounds, which is 3.75 to 4.58 foot pounds. (There's also a conversion to Newton Meters for the metrically inclined.) I found one on Amazon by Tecton that I think will suit.

Re: Helical Head Carbide Inserts

#14

Re: Talk to a carbide vendor...

William Duffield

Thanks for the confirmation, Steve.

Re: Helical Head Carbide Inserts

#15

Re: A couple more variables

Larry Clinton At Frankfort, (Central) Indiana

I don't find it necessary to use a torque wrench. Both my planer Byrd Head and my joiner Grizzly head came with wrenches from the supplier (I feel sure they were provided by the manufacturer). I only had one issue when I rotated all the inserts on my 20" planer ~ broke one insert when I was tightening it down. I found a small bit of hard derbies under the insert. Have had no other issues. I don't disagree with your use of a torque wrench, certainly won't hurt anything.

Re: Helical Head Carbide Inserts

#16

Re: A couple more variables

William Duffield

There's a good chance that a torque wrench wouldn't have saved your insert with the debris under it. I figure that using one is just good insurance. I certainly don't want any stray inserts or pieces of inserts bouncing around inside the planer, or being propelled out into the shop.

If I wanted to order the replacement head for my DJ20 jointer right now, Byrd includes a torque wrench with the head. However, I'm not ready to do that, and a torque wrench was not supplied with my used planer, nor by Powermatic with a new planer.