Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Another OT, removing masking tape????

Posts

Another OT, removing masking tape????

#1

Another OT, removing masking tape????

Barry Irby

The house I bought to flip has the old style brown masking tape on some crown molding. (A lot of it) Its been there for years. My experience is its now pretty much permanent. Anybody got a way to remove it? Easily? No, easier than that.

I'm thinking of just removing the trim.

Re: Another OT, removing masking tape????

#2

Re: Another OT, removing masking tape????

Jesse Cloud

Have you tried softening it with a hair dryer or heat gun? Not exactly easy, but it might work depending on what adhesive was used...

Re: Another OT, removing masking tape????

#3

Re: Another OT, removing masking tape????

John Veerkamp

Goof Off will soften the adhesive , May need to let it set for awhile. Major PITA

Re: Another OT, removing masking tape????

#4

Re: Another OT, removing masking tape????

walta

First give denatured alcohol a shot. It rarely damages a surface and softens many types of glue. If that will not cut it then I go to lacquer thinner.

Please note both products have low flash points and fire is possible if you give it a spark or a flame.

Note Goof Off had a lot of nasty ingredients many are transdermal and are absorbed thru your skin. As is lacquer thinner.

Try applying your solvent with a Scotch Bright pads.

Walta

Re: Another OT, removing masking tape????

#5

I was thinking of heat too...

John in NM

But really I think the best route is to rip it out unless it's especially unique molding or something. Even if I were wanting to salvage the molding I would be taking it down for stripping.

Re: Another OT, removing masking tape????

#6

Re: Another OT, removing masking tape????

Yonak

My go-to adhesive remover is Toluene. It's possible Xylene is replacing Toluene, however, as I couldn't find Toluene last time I went to get it. I don't know if Xylene is as good.

Re: Another OT, removing masking tape????

#7

Re: Another OT, removing masking tape????

Matt Robinette

Steam it is amazing how one of the inexpensive floor steam cleaners can be used to remove all sorts of things without the need for chemicals. Most have a nozzle for spot cleaning. I also have used my Earlex steam generator to remove stickers. Steam will hydrate the adhesive aiding in its removal.

Re: Another OT, removing masking tape????

#8

Re: Another OT, removing masking tape????

Joseph Mulherin, sr

After reading the other notes from the guys I must say to just take the old crown molding down, install new and be done with it.