Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Pocket holes for Clubhouse style full size loft be

Posts

Pocket holes for Clubhouse style full size loft be

#1

Pocket holes for Clubhouse style full size loft be

Ashley

I'm new to woodworking & this is my biggest project to date. I was wondering if pocket hole joinery would be suffecient for my clubhouse type loft bed it will be for full size mattress. The end result will hopefully look like the 1 in picture. This will also be accommodating a 6 yr old & 3 yr old twin boys. It will be 12 2x6s tall 5 1/2ft and needs to be 54" on side walls and 75" length across front. I went by my own measurements & with the rush n 3 screaming kids in my ear my boards ended up cut too short. I'm shy 6" on sides & 3" in front. I thought could attach a 2x6 standing straight up at the corners to make it right size. Any help or suggestions


img

Re: Pocket holes for Clubhouse style full size loft be

#2

Please resend picture


Re: Pocket holes for Clubhouse style full size loft be

#3

Re: Please resend picture 


img

Re: Pocket holes for Clubhouse style full size loft be

#4

Re: Please resend picture

Keith Newton

Ashley, You must register before you can post a pic.

Re: Pocket holes for Clubhouse style full size loft be

#5

Re: Please resend picture

Ashley

Sorry maybe can open this one https://s-media-cache-ak0.pinimg.com/736x/d1/fa/d0/d1fad0fcc56b81671a11d85ed11a10ae.jpg


img

Re: Pocket holes for Clubhouse style full size loft be

#6

Re: Please resend picture

Ashley

I did & it's showing it on my end :-(

Re: Pocket holes for Clubhouse style full size loft be

#7

Help will be coming

Gary Smyth

From the picture it is hard to tell where the pocket hole are planned. If building the face, probably. If supporting a mattress with three youngsters skylarking on the top level, I'd look to heavier bed hardware with some 100% solid support for the mattress and set directly into vertical posts reaching the floor. I may have misunderstood what you intend.

Re: Pocket holes for Clubhouse style full size loft be

#8

Re: Please resend picture

Hank Knight

Ashley,

That looks like a fun project. Your kids will love it.

Pocket hole joinery is pretty strong and quick. It's impossible to tell construction details from the photo, so it's hard to know if pocket holes would be sufficient. I can think of a half dozen ways to build it that would be plenty strong with screws alone. If you have doubts, especially with a bunch of rambunctious boys, think about using mortise and tenons or half lap joints to join the bed rails to the corner posts the top of the structure. That would give you an extra margin of strength and security. I think pocket hole joinery would be fine for the rest.

Now that you've figured out posting photos. Keep us updated on your progress with more photos.

Good luck with it.

Hank

Re: Pocket holes for Clubhouse style full size loft be

#9

Re: Help will be coming

Ashley Myers

I was talking about the main body alone for pocket holes. The actual mattress will set on piece of 1/2" plywood fit perfectly held up by o so many cleats. Lol they are wild!!! What would be your suggestion as to joining a 2x6 on back corner wall of sides & split 2x6 in front part of side (2match the front) where I had wood cut to narrow. Also thinking of splitting a 2x6 for ends of front. I'm at a loss as my best c course of action of joining that board standing straight up to the other boards laying on side. Also looking for insight on best joinery at corner of front and sides

Re: Pocket holes for Clubhouse style full size loft be

#10

Re: Help will be coming

Ashley Myers

I was talking about the main body alone for pocket holes. The actual mattress will set on piece of 1/2" plywood fit perfectly held up by o so many cleats. Lol they are wild!!! What would be your suggestion as to joining a 2x6 on back corner wall of sides & split 2x6 in front part of side (2match the front) where I had wood cut to narrow. Also thinking of splitting a 2x6 for ends of front. I'm at a loss as my best c course of action of joining that board standing straight up to the other boards laying on side. Also looking for insight on best joinery at corner of front and sides. Do you understand or have I lost you cuz I keep my mother lost when it comes to this

Re: Pocket holes for Clubhouse style full size loft be

#11

Re: Please resend picture

Ashley Myers

Any suggestions on how to attach the tuba sex standing up to the ones laying on side which are joined by pocket holes for the extra length that I messed up on also what is easiest joinery without major tools all I really have is a skill saw bandsaw and kreg my neighbor does have a tablesaw tho

Re: Pocket holes for Clubhouse style full size loft be

#12

Re: Help will be coming

Ashley

Also is there a certain way the pocket holes are to be positioned when final setup is made for better holding the downforce

Re: Pocket holes for Clubhouse style full size loft be

#13

Re: Please resend picture

Ashley

I am so sorry speak to text is crazy sometimes it was supposed to say 2x6 lol....& Also is there a certain way the pocket holes are to be positioned when final setup is made for better holding the downforce

Re: Pocket holes for Clubhouse style full size loft be

#14

Re: Pocket holes for Clubhouse style full size lof

Gary Smyth

I'm pretty sure I'm not following your thoughts. But let me volunteer that I would over build the frame for the unit and face the front and sides after being sure that the top will withstand the play of the kids. The last thing you want to have happen is to fall or collapse. That said my thoughts are to build the frame locking in the members with bolts and half lap joinery. I would not scrimp and if it means buying additional lumber do it. With the frame built like a battleship, and anchored solidly to at least one wall (so it can't fall forward as three kids climb or sit on the front edge), maybe the floor too, go from there. I remain concerned about the top. With 1/2 inch plywood I would screw four cleats as a continuous inside frame completely around the inside perimeter and buy or fabricate and anchor to those cleats an additional six wood or steel bed slats supporting the ply. With a full size mattress 1/2 ply secured only at the perimeter is not good enough. View the bed as a playground jungle gym. Fill in the cosmetics after the frame is safe with three bouncing kids five feet in the air. You may have to rethink joinery and anchoring before other elements.

Re: Pocket holes for Clubhouse style full size loft be

#15

Re: frame of bed

Ashley

Well the thing there is that the frame per say wld be the actual walls that's why did as tall so could just drop down into it.... here is the bed if haven't seen pic that is if it will load since nothing is working for me today


img

Re: Pocket holes for Clubhouse style full size loft be

#16

Re: frame of bed

Joseph Mulherin, sr

Ashley, you said your neighbor had a table saw, so he/she is already a woodworker. Go to then for advise because they are closer and could probably have the solutions you are asking about.

Re: Pocket holes for Clubhouse style full size loft be

#17

An observation on a bed like that

Dick Coers

is that tucking in the sheets is really tough! I made one 4' high for our kids when they were little. It had a bookcase on one end, a dresser and toy storage on the front. Getting both of the sheets under the mattress was a nightmare, even when the kids got old enough to help. You had to bunch it up on one end, send a kid over to tuck them under, then get them back to the ladder. Military corners, they were not!!!! Imagine what a neat job is for a 4 year old. They did love the beds, but that weekly job was a REAL JOB!

Re: Pocket holes for Clubhouse style full size loft be

#18

Kreg DVD

Matt Robinette

Kreg who is the largest supplier of pocket screw tools and supplies has a number of DVD's and CD's available with projects and construction methods. I have found that pocket screws are a very strong and quick method of constructing cabinets,tables and just about any project that uses 1by* lumber. That said I would be hesitant to use the screws on 2by* lumber instead deferring to carriage bolts for the frame. I like to over build anything that children use because they will stress test just about anything and everything they get their little fingers on.

Re: Pocket holes for Clubhouse style full size loft be

#19

A Radical Suggestion

Mark Mandell - Gone Round In New Jersey

Very leery of giving you advice in this situation because a) I don't have a good word picture from your description and b) there is a distinct possibility that you may not be able to get-there-from-here.

Basic principal is that there are two remedies for boards cut too short. 1) Divine Intervention or 2) Get new boards.

I think your best option here is to find a good carpenter in your area (they're ever-where) and ask him/her over for a consult and short lesson. You'll get valuable knowledge and perhaps make a friend.

;)

Re: Pocket holes for Clubhouse style full size loft be

#20

Re: A Radical Suggestion

paul in AZ

Mark: You forgot:

3) the infamous board stretching machine

Re: Pocket holes for Clubhouse style full size loft be

#21

Tried That

Mark Mandell - Gone Round In New Jersey

Cut that sucker TWICE and it was Still Too Short!

Re: Pocket holes for Clubhouse style full size loft be

#22

Re: frame of bed

ian in Sydney

Ashley

apart from the photo you posted, do you have actual plans for the bed?

There may be a way of modifying the plans to make the short boards "disappear"

Re: Pocket holes for Clubhouse style full size loft be

#23

How much money are we taling about here

Bill Tindall, E.Tn.

There isn't anyone more motivated to not waste lumber than I am, but there comes a time when it is best to just suck up a mistake and start over doing it right. My experience in early screwups in a project is that one pays the price for the whole rest of the project dealing with the error. There is something to be said for "if it is worth doing it is worth doing right".

Re: Pocket holes for Clubhouse style full size loft be

#24

Re: How much money

Mark Mandell - Gone Round In New Jersey

1. The stuff grows on trees

2. Everyone's "shorts" bin has to start somewhere.

:D

Re: Pocket holes for Clubhouse style full size loft be

#25

Is anyone else concenrned about offering advice?

Bill Tindall, E.Tn.

Some, maybe all, colleges have banned home made loft beds. Apparently some fell, causing injuries. The obvious conclusion is that one needs to have some experience engineering one of these affairs or they risk failing in use.

I didn't follow all the details of how this bed was going to be made, but the headline "pocket screws" and bed construction was alarming. My advice would be for someone on site that understands wood, an experienced carpenter for example, to review the project to determine that it will be constructed safely.

Were I building this affair I would make a loft bed using traditional mortise and tenon joinery used for centuries to hold beds together- 4 sturdy posts and beefy rails mortised into the posts. Then I would cover it with 3/4" boards to achieve the desired appearance. (see my picture of a loft bed in the WoodCentral Galleries for an example that will not fail!)