Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Finished desk *PICS*

Posts

Finished desk *PICS*

#1

A.J. Hamler

Finished desk *PICS*

A.J. Hamler

It occurred to me after whining a couple weeks back about the slow-drying oil finish I put on it, that I never posted finished shots of my 19th-century drop-front desk. Because they were so popular with officers during the Civil War, they've come to be known as "field desks."

It's made of solid cherry throughout, except for cherry ply in those door panels (and the back and the drawer bottoms, which you can't see).



The desk is 27" wide by just over 21" high. It's 10-3/4" deep overall and 10" deep on the inside. The black writing surface is leather bonded to a thin piece of hardboard set down inside the inner surface of the frame-and-panel door. The tall dividers on the left and the short dividers at the top/center are fixed, but the shelves on the right slide out to create larger openings on that side (if, say, you wanted to put something taller on one of those shelves).

A pair of details you can't see in the main photos is that those drawers are only 8-3/4" long, leaving a 1-1/4" space behind each. Filling that space behind each drawer is one of these secret tills:


This was a fun project to do, and I'm exceedingly pleased with how it turned out.

A.J.

Re: Finished desk *PICS*

#2

Did you consider transporting

Gary Smyth

the desk? At 27" wide and almost 11" deep moving it regularly might be awkward. Did you consider (reject) lifting handles as are used for campaign and tansu cabinets? This desk is first class and I especially like the leather top which is more forgiving to a ink pen nib. Congrats.

Re: Finished desk *PICS*

#3

Re: Finished desk *PICS*

Martin S.

Very nice, AJ,

I really like this. So much, I'd like to build one. I know you have published books in the past. Will this go in a book, or will it be available in a magazine article?

In other words, let me know how I can buy some plans!

Thanks for posting, very nicely done.

Martin

Re: Finished desk *PICS*

#5

A.J. Hamler

Re: Did you consider transporting

A.J. Hamler

For desks intended solely for indoor use, handles were rarely used on the extant samples I've seen. Although portable, they tended to stay put if used indoors. Even for field use you'd be surprised how many didn't have handles. A number of field modifications, though.

Re: Finished desk *PICS*

#6

A.J. Hamler

In fact...

A.J. Hamler

This was a project article for an upcoming issue of Woodworkers Journal. Don't know what issue, though. It won't be in the very next issue (although I have a different project I that one), so maybe the one after that.

Re: Finished desk *PICS*

#7

Re: Finished desk *PICS*

John McGaw

Beautiful work. Out of curiosity, what sort of joinery was used to connect the front of the top hinged compartment to the sides?

Re: Finished desk *PICS*

#8

Re: Did you consider transporting

Sgian Dubh

AJ, a nice little desk with attractive proportions, but I do have a couple of comments, both of which I'm afraid are slightly critical.

I find the drawer front and drawer sides a little out of proportion with each other for my taste. A side slimmer than the front would be my choice, say about 15-16 mm (~5/8") for fronts and perhaps 8-10 mm (±3/8") for sides. Over the years I've come to realise there's a typically American convention for drawer front to sides proportions. You seem to have followed this convention, whereas myself, being British, find it a bit jarring ... such cultural differences are interesting I find. I would also prefer the drawer front dovetails a little wider and the pins narrower because your proportions tend towards what I think of as carcass dovetailing, executed primarily for strength rather than aesthetics. Slainte.

Re: Finished desk *PICS*

#9

Re: Finished desk *PICS*

Joe in a Cleveland suburb

Very nice work. Thanks for sharing.

Re: Finished desk *PICS*

#10

Kneale Brownson

Love that drawer pull idea!!!


Re: Finished desk *PICS*

#11

Re: Finished desk *PICS*

Joanne in Point Pleasant, PA

Beautiful! Love that cherry! I might be tempted to build one of these, too. I once made a lap desk out of mahogany for a friend. Loved that project. This is kind of like a lap desk on steroids. Thanks for sharing.

Re: Finished desk *PICS*

#12

Re: Finished desk *PICS*

Ray Newman

Very impressive: simple lines, uncluttered design, and constructed in a craftsman-like manner. Nice work.

Re: Finished desk *PICS*

#13

Thanks!


Re: Finished desk *PICS*

#15

A.J. Hamler

Re: What is the finish

A.J. Hamler

I did four applications of linseed oil, rubbed out, then an application of paste wax and polished it up.

A.J.

Re: Finished desk *PICS*

#16

A.J. Hamler

Biscuits

A.J. Hamler

I used a biscuit joiner. Some originals might have used dowels or a couple screws hidden underneath that half-round molding. A surprising number, however, would have been nailed on.

A.J.