Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Parallel Surfaces vs Flat and Straight

Posts

Re: Parallel Surfaces vs Flat and Straight

#26

You guys know your areas better than I...

John in NM

But I still find it nothing short of amazing that in Albuquerque I have a choice of three vendors (one retail) that I know of, Santa Fe one vendor, and when I lived in Tucson there were two industry yards and 2 retailers (one of whom is a branch of the outfit Tony mentioned).

This is the desert - all that wood comes from places like where you guys live! Just amazing :D

Re: Parallel Surfaces vs Flat and Straight

#27

Furniture Grade?

Bill Tindall, E.Tn.

I don't know what expectations are for lumber but you can be certain that the numerous shops in the Columbia area that work hardwood lumber are buying and using lumber that is suitable for building anything that can be built from domestic hardwood lumber. The problem may instead be lack of a place that is willing to let an occasional customer sort through a pack.

Plenty of the parts in my furniture are cuttings from as low as #2Commmon lumber. It would be a rare piece of furniture that I could not efficiently make from #1 Common. The clear cuttings for any grade are all the same. Only the price and yield differ among the grades.

Ask someone in the club in Greenville where to buy lumber. Lumber is most certainly available in Greenville.

You are not far from Asheville. There are several studio furniture makers in Asheville. Look one up and ask where they are buying. I can not imagine anyone being more picky about lumber than a studio furniture maker. I could suggest some places but they would be no better than what you could find locally, unless you want imported lumber. In that case Asheville is the place to go for there are two importers located there.

There is a dealer north of Winston Salem (Steve ???) that has a huge selection of everything. They ship and cater to retail buyers.

I suspect the problem is not lack of availability but rather not able, for what ever reason, to buy like the local users of hardwood lumber are buying. I would be willing to make a substantial bet that there is no city in the US of 100,000 people where I could not readily get 100 bdft of FAS1F (top NHLA grade)maple so long as I was willing to buy by grade, random widths and lengths, the most common way shops buy lumber.

Re: Parallel Surfaces vs Flat and Straight

#28

Re: You guys know your areas better than I...

Bill Tindall, E.Tn.

Amazing indeed. Some of the largest hardwood mills in the US are near Columbia. If you can't buy lumber in these places one hasn't looked very hard or the customer is unwilling to buy lumber according to how it is being marketed in these places.

When we were in business it would have been said that there was no place to buy hardwood lumber in the Tri Cities area. It would have been true if the customer wanted to sort through a pack of lumber to pick out according to their needs a few boards. But if they were willing to buy by grade, random widths and lengths any domestic hardwood lumber was available at a fraction of the price they would pay by driving to Knoxville and shopping at Woodcraft where they could pick from a very limited selection.

Re: Parallel Surfaces vs Flat and Straight

#29

Dale Lenz

FAS1F...

Dale Lenz

use to be select grade. Where FAS was graded on the worse face. Did NHLA remove FAS all together now?

Re: Parallel Surfaces vs Flat and Straight

#30

Thanks Bill


Re: Parallel Surfaces vs Flat and Straight

#31

not correct

Bill Tindall, E.Tn.

the grades in descending order of yield of clear cuttings

FAS, FAS1F. Sel, #1 Common, #2A, #2B, #3 and below grade (pallet lumber).

These grades were in my 1970 grade book and they are still in the newest book I have.

The reality is that no one puts up packs of FAS. The top NHLA lumber grade I ever say marketed was FAS1F&Btr. If supply is tight no one puts up packs of cherry and walnut, and occasionally maple, better than Sel & Btr.

That said, NHLA grades are much less relevant than they used to be. Foreign buyers are picky and lumber will be graded for export or specialty domestic markets. We loved to snag an export pack and they could be identified by the lengths included. This lumber was always better yield than domestic FAS1F&Btr.

When I toured Baillie Lumber Company last year I was told that all their lumber is graded for spatiality markets. If someone orders a truckload of FAS!F&Btr they reassemble packs to resemble a pack originally graded FAS1F&Btr.

The bottom line of it all is that pack quality depends on supply. When supply is tight that is not a good time to stock up.

Re: Parallel Surfaces vs Flat and Straight

#32

Re: Trust me!

John K Jordan

> ...if anyone can point me to a decent hardwood resource around here,

> I'd be thrilled!

Tony, it's not around the corner from you, but many in East TN buy from Jefferies:

https://www.facebook.com/pages/Jeffries-Wood-Works/446121655478402

They are not cheap but they usually have a huge stock with a variety of domestic and exotic hardwoods: boards, slabs, chunks. I like to browse their exotic turning blanks. I once saw an ebony log there! I know they also carry local woods since they were interested in rough green lumber I cut on my own sawmill. If you over are this way, look them up. Call for directions since they are a bit hard to find. If you do come to the this end of the state, I may have some extra cherry, air dried, mostly 4/4.

JKJ

Re: Parallel Surfaces vs Flat and Straight

#33

Re: Baloney

TomD

My one caviat is that if you don't control your time you may find yourself unable to deal with these places you refer to. Many keep banker's hours, or worse. If you knew them well first, and were building things out of common sizes of lumber, and could stand to order large amounts, you could deal with them on spec, but there are many people who will not do that.

In a lot of cases it isn't a mater of wanting to cream their stock, vs, take grade off the top, it is the need for specific pieces. There are cases where the pieces are often under grade, but they have to be the pieces one needs to do a particular project. A real cabinet place lets you sort the pile, they have to figure out for themselves how to make a buck without asking too much.

Re: Parallel Surfaces vs Flat and Straight

#34

Re: Furniture Grade?

TomD

"I suspect the problem is not lack of availability but rather not able, for what ever reason, to buy like the local users of hardwood lumber are buying. I would be willing to make a substantial bet that there is no city in the US of 100,000 people where I could not readily get 100 bdft of FAS1F (top NHLA grade)maple so long as I was willing to buy by grade, random widths and lengths, the most common way shops buy lumber. "

I bet you are right. I used to order 12 inch wide 12s, and before they moved out of town, Oliver lumber could roll up to the door with as many truck loads as you like. Then you design some project around that material and set to. The problem for "building a Houseful of Furniture", is every project is different, species may ideally be different, and random widths and lengths is not going to get er done.

One minor tip if you are free is to find out when people are slow, then bring in some coffee...