Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Porter Cable edge guide

Posts

Porter Cable edge guide

#1

Porter Cable edge guide

Jerry Gibbs

Does an edge guide for the PC router 8901 exist? any info appreciated.

Re: Porter Cable edge guide

#3

Re: Porter Cable edge guide

Jesse Cloud

I'm not familiar with the 8901, but if this isn't a tool you would use often, its easy to throw together a makeshift edge guide. Just attach a piece of 1/4 inch ply or other material to the base and attach a piece of wood at the relevant location.

Its not adjustable, but its cheap and you can make one in a few minutes.

Re: Porter Cable edge guide

#4

Re: All 890 series router uses the same

Walt

I'm pretty sure hole patterns - base and edge guide between the 690 and 890 are the same. Big PC routers are different.

Re: Porter Cable edge guide

#5

8901 is just the fixed base number *LINK*

Dick Coers

An 892 router is an 8902 router motor with an 8901 fixed base.


Porter Cable

Re: Porter Cable edge guide

#6

Re: Porter Cable edge guide

roger lance

Number 8901 is the fixed base unit for the 2-1/4 hp router motors which has three router models (891, 892, & 893).

Router edge guide #42690 is for use with router models 100, 690, 691, 693, 891, 892, and 893.

So, yes, an edge guide is readily available.