Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Recent Project - Shuffleboard Table w/ PICS

Posts

Recent Project - Shuffleboard Table w/ PICS

#1

Recent Project - Shuffleboard Table w/ PICS

Jason Falejczyk

Been a long, long, long time since I posted. Some may recognize the name. Figured since I've built something worth sharing, I would!

This is a 16' shuffleboard table built from cherry and hard maple...with Ipe/cherry inlay. Playing surface is 3" x 20" x 14'8", and actually had to come through a hole in my dining room floor to get into the basement.

If this inspires any of you to build one, make sure you have awesome neighbors willing to help lift a 400lb slab back and forth, back and forth, back and forth for hours through your drum sander! Yeah, that was fun! My little Delta 18" was a champ...had to setup 16' of infeed and 16' of outfeed for the job as well!








Re: Recent Project - Shuffleboard Table w/ PICS

#2

Re: Recent Project - Shuffleboard Table w/ PICS

mdclor

Jason, that looks great! You are to be complimented for your excellent craftsmanship and perseverance.

Re: Recent Project - Shuffleboard Table w/ PICS

#3

Re: Recent Project - Shuffleboard Table w/ PICS

Paul Blackwell

Wonderful job! I purchased a table this past winter after thinking long and hard about building one. Handling the 3" table deterred me. I had to have my table passed through a basement window with the help of about eight friends. Congratulations on a fine job.

Re: Recent Project - Shuffleboard Table w/ PICS

#4

Re: Recent Project - Shuffleboard Table w/ PICS

Jason Falejczyk

Paul,

It almost deferred me as well, and definitely delayed me. I was supposed to start this a while ago. I built the base first and actually used it as an assembly table, since I needed 16' of a dead flat area. There are 19 rows and 62 individual pieces in the top, in an alternating pattern (and mirrored from center) of 2', 4', 5', 6', 7', and 8' lengths to avoid cross-seams. I built a row at a time using pocket hole joinery on the faces to get nice, tight butt joints.

The sanding was the worst...9 hours. My Delta was too small. As hard as I tried to glue up flat on the bottom, the boards I got were so twisted it was impossible to joint true 90's on the edges before glue-up. We had such a hard time especially since the sander could only handle 18" of the 20" width on each pass.

Was it absolutely perfect when I called it quits? Probably not, but close.

The decent was all drawn in CAD to avoid any obstacles. Top came through dining room window, through floor at 30 degree pitch, avoiding suspended ceiling main T on one side by 1/16" and support beam on other by 1/8". I built a receiving ramp in basement to help slide it down. It bottomed out on floor and then we had to temporarily lift and remove the ramp to finished lowering it. It was fun!

Re: Recent Project - Shuffleboard Table w/ PICS

#5

WOW!!


Re: Recent Project - Shuffleboard Table w/ PICS

#6

Hey Jason, long time no hear from...

Tim Greif - West of Chicago

Good to see you're still alive and making sawdust. I post a lot less these days too, at least less than when we switched over from the old Badger Pond days. That board is spectacular. I had to smile thinking of you trying to move that into the basement. I had a similar experience with my pool table - one piece slate and the frame is not dis-assemblable (is that a real word?). Friends and neighbors to the rescue. Table is staying with the house. Or at the very worse, coming out with a chainsaw. I suspect you may be in the same boat. Good hearing from you.

Tim

Re: Recent Project - Shuffleboard Table w/ PICS

#7

Re: Recent Project - Shuffleboard Table w/ PICS *LINK*

walta

It looks great.

Having installed a few boards I wonder did you put any Climatic Adjusters under the board?

Walta


Climatic Adjusters

Re: Recent Project - Shuffleboard Table w/ PICS

#8

That's one massive project

Yonak

The contrasting color design is brilliant, the corners are superb, the inlay is well executed. Overall it's a fabulous table. You deserve a three (a 26 if you count hangers).

Re: Recent Project - Shuffleboard Table w/ PICS

#9

Re: Hey Jason, long time no hear from...

Jason Falejczyk

Hey Tim....good to hear from you as well. Yeah, unfortunately I will have to make a new set of friends to carry it out if we sell and I still want the table! If not, plan is to list a shuffleboard table for sale, with free house!

Here's a few pics of the entry hole and receiving ramp in basement. It worked out really great.




Re: Recent Project - Shuffleboard Table w/ PICS

#10

Re: Recent Project - Shuffleboard Table w/ PICS

Jason Falejczyk

Sure did....have 4 of them, purchased from McClures. Honestly I have to question their effectiveness. I torqued on the inner nuts to try and give it a slight concave and stopped in fear of splitting the top. I can't imagine those being capable of "bending" a 3" thick lamination. I would like for them to work, but need to get a little more confidence before I try again. It was a marathon sprint completing the table before a weekend of scheduled parties...finishing at 5:30pm Friday. Maybe when I get some time I'll try adjusting them again.

Re: Recent Project - Shuffleboard Table w/ PICS

#11

Corner execution ** w/ PICS **

Jason Falejczyk

Do hangers count? I'd refuse to play on any table that does not count a well placed hanger!

Thanks Yonak...first time trying inlay as well. After spending 8 hours maneuvering and sanding that top, I was pretty nervous about cutting into it, but it worked out great.

Corners? You have no idea how much work went into the corners. Having a lathe, shaper, and milling machine would have been ideal, but instead I worked with what I had. You can not tell, but all the cherry railing is also concaved along the width. Here's some pics of the process/jigs required...












Re: Recent Project - Shuffleboard Table w/ PICS

#12

"marathon sprint"

Yonak

That's a great term. It perfectly describes the phenomenon we all know too well.

Re: Recent Project - Shuffleboard Table w/ PICS

#13

Re: Recent Project - Shuffleboard Table w/ PICS

Paul Blackwell

My purchased table has climatic adjusters also, and I too am leery of trying to achieve a concave surface by tightening them. Bending a 3" table is asking a lot. After the marathon of friends and relatives helping move the top through the basement window, my wife looked at the table, and all the equipment in my basement shop, her comment was "I hope the next owner likes woodworking and shuffleboard, because this stuff is here to stay."

Re: Recent Project - Shuffleboard Table w/ PICS

#14

Re: Recent Project - Shuffleboard Table w/ PICS

John Foster

Awesome! My son and i made a replacement slab for his father-in-law's 10' table this past Christmas. That was a major project for us, your's is in a whole other league!

Re: Recent Project - Shuffleboard Table w/ PICS

#15

Ellis Walentine

Wonderful, Jason!

Ellis Walentine

I really liked the jigs you used to make the crowned corners. Very ingenious. I don't think I could have summoned the energy to follow through with all the router work. But it sure was worth the effort.

Cheers,

Ellis

Re: Recent Project - Shuffleboard Table w/ PICS

#16

Shop Shots worthy......

roger lance

Jason.....what a build !!.....needs to be honored in the Shop Shots section.....hopefully, David will contact you and make that happen.

I second Ellis regarding the genius of the jigs you made/used.....masterful problem solving in those jigs.....reminded me of Norm Abram.

Pool table next ??? :D :D

Re: Recent Project - Shuffleboard Table w/ PICS

#17

Re: Recent Project - Shuffleboard Table w/ PICS

Ron in Eugene

Jason, that is one massive a complicated project! The jigs you had to develop and build are very creative. The craftsmanship is just amazing, great work. You must like to play shuffle board a great deal. (-;

Re: Recent Project - Shuffleboard Table w/ PICS

#18

Re: Recent Project - Shuffleboard Table w/ PICS

Joseph Mulherin, sr

Jason, I have to agree with all the other guys....that is ONE MAGNIFICANT project and you need to post all of the pics in the gallery for us to see from first to end.....WOW!!!

Re: Recent Project - Shuffleboard Table w/ PICS

#19

Coming To Shop Shots Soon

David Yoho

I wrote Jason and asked about doing a Shop Shot on this project. He will be sending me some more images along with text explaining them to get a better look at the various jigs he employed. As soon as he gets a chance and sends that in, I'll start putting it all together and posted.

Stay tuned...

David Yoho

Editor - WoodCentral's Shop Shots