Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

tiger maple finish

Posts

tiger maple finish

#1

tiger maple finish

Paul Blackwell

I'm building a jewelry box from some beautiful tiger maple. Does anyone have a good foolproof method of making the grain really pop? I don't have spray capability. Mostly I finish projects with polyurethane.

Re: tiger maple finish

#2

Re: tiger maple finish

Joe in a Cleveland suburb

The more knowledgeable finishing folks here I'm sure will respond, but if you have access to FWW on line or someplace, Jeff Jewitt did this article:

Pop the Curl in Curly Maple

Fine Woodworking #135, pp. 38 April 1 1999

For the wall clock I am making right now I plan to use some diluted reddish brown TransTint dye, sand most off, then some Old Maple dye, then flood it with BLO, then shellac.

(I forget the exact names of the dyes.)

I like the look of it on some scraps I played around with.

I asked Michael Dresdner this question on the guest chat he did here on 1/2014 and I think his response was to just flood with BLO.

http://www.woodcentral.com/chats/dres_transcript140109.html

Good luck.

Joe

Re: tiger maple finish

#3

Re: tiger maple finish

John in NM

I like to go for an amber color, since maple gets pretty yellow with oil and age. A dye is the easiest way to go, I've seen nice results with that - take a look at Ellis' gallery page for an example. The color helps pop the grain some in addition to making a more pleasing finish over the long term.

I've not done a lot with dyes, but that is the first place I'd look. After that, oil and some kind of film finish and you're all set.

I've also used the old style colorant, a ferric solution which reacts with the tannins to color the wood. Basically the same sort of color effect as dying the wood, but for some reason I like learning the old way.

Re: tiger maple finish

#4

Re: tiger maple finish

Barry Irby

Whatever you do practice on a scrap or scraps. Try your finish and put it in the sun for a few days to see how you like it.

Re: tiger maple finish

#5

Re: tiger maple finish

roger lance

2nd the Jeff Jewitt/Trans-Tint dye approach.....should be numerous sources of info on this method online.

Re: tiger maple finish

#6

Re: tiger maple finish

Lee Schierer in McKean, PA

I like clear lacquer in a semi gloss finish. That is what I did with this box.



Lee

Re: tiger maple finish

#7

Doesn't that also have the advantage...

John in NM

Of not yellowing over time?

Great looking box Lee :D

Re: tiger maple finish

#8

Re: Doesn't that also have the advantage...

Lee Schierer in McKean, PA

Not nearly as much yellowing as polyurethane.

Lee