Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Multico mortiser

Posts

Multico mortiser

#1

Multico mortiser

John Stevens

I just purchased a late 90's PM20 multicolor mortiser in fantastic shape. It came with 6 new chisels. One problem...there are no chisel bushings or a manual. Anybody have a recommendation on where I could purchase? Anybody have a picture of the bushing and how the chisel attaches? Thx in advance.

Re: Multico mortiser

#2

Re: Multico mortiser

roger lance

I remember these machines from way back when Garrett Wade sold them.....made in England as I recall......they were the grand daddy of benchtop hollow chisel mortisers and were on the market for a number of years before Delta came out with one. I know this is not much help but, if worst comes to worst, IMHO, any machine shop could easily make the part you seek.

Re: Multico mortiser

#3

Re: Multico mortiser

Wess

I have the same mortiser and can forward you a pic of the bushing. It's dead simple,the od to fit the machine the id to fit the chisel with a cross drilled clearance hole that a grub screw passes through which holds the chisel. I've made a couple of them as the older Multico chisels have a different od than the newer offerings to fit the Delta and their ilk.