For a friend
John Pappas
Sorry, not a great picture. I made this table for a young friend who has a new home. A surprise gift.....hope he can find a place for it.

Knowledge You Can Build On — Est. 1998
For a friend
John Pappas
Sorry, not a great picture. I made this table for a young friend who has a new home. A surprise gift.....hope he can find a place for it.

Re: For a friend
Ellis Walentine
Nice surprise, JP. The drawers give the piece the suggestion of a face, or maybe it's my overactive imagination...
Ellis
I like it
Bill Tindall, E.Tn.
It will be a practical table for your friend. What is the wood?
Re: I like it
John Pappas
Thanks, Bill.
White oak. Stained with TransTint Golden Brown dye.
Re: For a friend
John Pappas
Thanks, Ellis.
Face????? I don't see it.
Re: I like it too.
Kneale Brownson
Looks like the drawer fronts were cut out of the apron, but they seem to have taken the stain differently. Is that just the lighting? Are those breadboard ends on the shelf and did they take the stain differently too?
Re: I like it too.
John Pappas
Kneale,
Yes, the drawer fronts were from the same apron. Used a hand rip saw to cut that. Not my best effort. I had to plane them a bit, so I lost some matching grain. The stain is even. More a function of the lighting I used. Not the best you can see. The breadboard ends on the shelf also match the shelf. It's how some woods reflect light differently from various angles.
Thanks for your comments.
Re: For a friend
roger lance
John.....its good to have you as a friend.....I'm sure he'll like it.....it appears to me that you tapered the outside of your legs which is a little unusual.....and I'm assuming that you did this to make attaching the shelf less complex....good looking piece.
Re: For a friend
Ellis Walentine
Well, you have to really stretch it to see a face, but the drawers sure look like eyes. I used the same breadboard end trick on some tables I made a while back. It's a great way to keep the leg spacing constant as the shelf shrinks and expands with the seasons.
Nice work, and an awesome gift.
Ellis
Re: For a friend
John Pappas
Roger,
Yes, the legs are tapered on the outside. Unusual perhaps, but I have seen it done before. The thing I like best with this is that the 'negative space' under the table is rectangular....I like that aspect. The shelf would be easy either way. It is not attached, but rests on shelf supports. The table itself is desk height, so another possible use of this table is to remove the shelf and use it as a writing desk.....(but who writes at a desk these days?).
Who writes at a desk now days ??......
roger lance
Us old guys.....cause we still got a land line.....pencils with erasers.....graph paper.....plastic measuring stuff.....the oldies radio station.....membership at the VFW.....

and a computer we don't understand.
Humm?......
Keith Newton
I guess you would know since you have a protractor right there, but I like to think I have a pretty good memory for numbers, and I was thinking that the acute angle of a RIGHT triangle with the side lengths of 3 - 4- 5, was 37º. It appears to me that you are showing 4.5, with the other givens. Are you sure you read that angle right?
If I'm right, do I win a prize or anything? ha
You're correct, there is a flaw.....
roger lance
that was an old picture that goes back to a build I made on a reloading bench in which I wanted to determine the angle of cut when jointing two pieces of trim of different thickness.....1 1/8" and 3/4".....and as I remember I didn't place that protractor properly on the drawing and got an incorrect reading which was later rectified.....even an old guy can make such a mistake if he hasn't used the protractor he got in junior high for a number of years.
As far as a reward goes, you may have to just be content with knowing that you are still a sharp eyed individual!!