Why are roll pins not acceptable...
Rick L
What exactly are you making where you need dowel pins???? I've worked with enough people for 40 years what they want and need are 2 different things.
Knowledge You Can Build On — Est. 1998
Why are roll pins not acceptable...
Rick L
What exactly are you making where you need dowel pins???? I've worked with enough people for 40 years what they want and need are 2 different things.
Have you tried...
John in NM
A job shop CNC machinist? A friend of mine gets a lot of work done this way, they often don't mind filling idle time on various machines with small jobs, especially simple ones like parting off rod into pins.
Just a thought.
Re: Shear don't cut---more options *LINK*
Tom Dunlap
Add this setup to the bolt cutter in the link:
https://books.google.com/books?id=1tkDAAAAMBAJ&pg=PA123&dq=rod+and+bolt+cutter&hl=en&sa=X&ei=nPzoVNv3NYmnyASk9YHQAg&ved=0CDEQ6AEwAQ#v=onepage&q=rod%20and%20bolt%20cutter&f=false
Stanley bolt cutter
Re: Not really...
Joseph Mulherin, sr
Yes, Gary, just what are you up to that you need "metal pins" of that size?
An explanation of your ideas would help us to decide your best method of cutting the pins from the rods...
and a picture of your plans would help too.
Re: Cutting 3/16 steel rod on the cheap
TomD
http://www.mscdirect.com/product/details/67503128
5 times more expensive than the split pins.
If you use the stop cut method, use a flip up stop, if it binds against a fixed length stop it can spin off on you.
Re: Got a miter saw?
Barry Irby
Someone gave me ten 10" abrasive blades that were suitable for a chop saw. Whatever the speed rating was, it was at least 50% higher than the saw. The blades looked very thin to me and unreinforced. I was frightened of them but decided to give them a try. I put on a heavy jacket, and coveralls over that and wore goggles and a face shield. Made one tentative cut and then on the second, the blade exploded. Not sure, but I think three pieces hit me. Thanks to my suit of armor, no harm done. I threw the rest of the blades away.
The worse reason to use your miter saw.
Keith Newton
Is that it will melt the plastic parts, like the chip deflectors, and clear window with the fine line to read the º <.
Otherwise, I like the thin un-reinforced blades because they cut faster and cooler. Maybe you used a stop, or didn't allow the part to drop away, which opens the cut. You can't ignore the expansion of the metal with these blades. There is no side clearance on the blade, like carbide, or alternate bevel, so they are very easy to bind.
One of the local steel suppliers won't even attempt to make cuts to length with an abrasive cut-off even thought they charge a couple of bucks to cut to length with a torch. But I've cut lots of parts without any problems, just by observing what went wrong when it failed, then correcting my mistake.
Harbor Freight
Joe Pack
Pick up a cheap Harbor Freight metal chop saw and some proper blades. What you are doing ain't brain surgery, and the HF saws are perfect for your use.
I have used my $49 on sale (almost always) for rod, rebar, flat stock and, with the proper blade, even brick for a patio.
HF tools are perfect for using a few times. I wouldn't try to make my living with most, but you're just cutting a few rods, and the tools are guaranteed for 30 days.
Re: Harbor Freight
iew
Caught my HF saw for $19.99 new about 10 years ago to do a small job. I thought I would just throw it away when finished. Well the saw just keeps on doing great when I need it. It's a lot cleaner that using a torch for angle iron. I was doing a job in Wichita and just stopped in at HF to look around. They had the saws stacked to the ceiling and for $19.99 ea, couldn't resist.
N M Bolt Cutters
I would use a 4" angle grinder & cutoff wheel
Grant in Iowa
I would use a 4" angle grinder and a cut off wheel. There are thin cutoff wheels that would make short work of this. I used to work in a fab/ machine shop and here's how I would do the job given minimal tools:
1. Lay the 15 rods out on a flat bench top with the right ends (assuming right handedness) overhanging the edge of the bench and ends even. Put a pan or bucket below to catch the pieces as they are cut off. On the left side, stick a piece of tape across the pieces of rod to hold them together and keep them even left to right as you move them for each cut. As the rods will be oily, you may need to wipe them down first and use duct or gorilla tape for adequate sticking power.
2. Using a piece of softwood, such as a piece of 2x4, clamp the right end of the rods down so they won't move, and such that they overhang past the planned cut line. Using chalk or a sharpie, and a square, make a line across the top to provide a cut line. Cut them with an angle grinder/ cutoff wheel. Parts fall in (non plastic) bucket or catch pan. Loosen board, slide set of rods right, clamp, mark, repeat. Probably a minute per cycle. Lots of sparks though, so be safe and wear proper protection.
When done, hit the ends with a bench grinder and wire brush wheel if they need to be burr free. Put them in drill and spin them on a bench grinder if the ends need rounded or eased for some reason.
Regarding other solutions, I am not sure cutting round stuff at the band saw is a safe operation without clamping. I have had wooden dowels get away from me, let alone steel.
If you don't have an angle grinder, you could use a Sawzall, as they are nearly as fast on solid metal, and faster on hollow tubing and pipe. Even a hand held jig saw will work good with a fine toothed metal cutting blade.
FWIW,
Grant in Iowa
Re: Harbor Freight
R. Payne
Personal experience with Harbor Freight is such that I won't buy anything from there. Twice I tried their tools, one broke on the first use, the other on the second. I don't figure it's worth my time and gas to even visit that store anymore.
ron
Re: Harbor Freight
iew
I have been buying tools from HF for over 20 years and have been satisfied. Never returned anything. Some of their stuff isn't pretty, but it works.
Re: I would use a 4" angle grinder & cutoff wheel
iew
That would be an expensive solution, use too many wheels. Use the cut off saw and get it on.