Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Level 1

Posts

Re: Level 1

#26

Sketching

John in NM

That was the one and only useful thing to come out of my freshman year in college, spent in the Architecture program. I'm still not good at sketching, but what I learned in that year was that it simply comes down to having a picture in your mind and a lot of practice with a pencil and paper.

The biggest pitfall I've seen with people thinking that they can't sketch is that they are afraid of putting down a "wrong" line and ruining their sketch. There are a couple ways around this that are well suited to any kind of design work as opposed to artwork.

First is to start with a light pencil - like a 2h or 4h - to get the basic shape down and not worry about "wrong" lines on the paper. Then follow up with a soft pencil - like an HB (#2) if you are a draftsman, or a 2b if you are more of a artist. If the idea is to communicate or simply record the shape or design, the heavier line will do that and the light lines are irrelevant. The purpose is not to make a tidy final drawing but to record the shapes you wish to record.

Second is onion skin paper. It's a 50 yard roll of yellow tracing paper that is so cheap (like $10) that you think nothing of trying multiple overlays and then tossing them all out when done. If you don't want to do the light pencil/heavy pencil trick, use a new overlay to refine shapes and play with them. If you go down a blind alley, you toss them out and go back to the last one you liked and proceed from there. If a tidy final drawing is your goal, once you get a shape you like on the yellow paper, you trace it onto a piece of vellum.

I guess the other benefit I got from a year in Architecture school is annoyingly neat and tidy printing. Not sure that is really a benefit, because though it is readily legible, even when messy, I get a lot of grief from others about that damn tidy hand writing :D

Re: Level 1

#27

Re: Sketching

Jesse Cloud

Good advice on sketching. Our prof told us that erasing is a waste of time, just keep going or start over. He also suggested using a dull pencil so you won't get caught up trying to draw fine details.

I still have some old sketchbooks and I go back to look at them sometime. Sometimes a drawing that didn't get traction years ago seems more interesting and worth developing now.

The prof never went anywhere without a sketchbook. He suggested that you draw interesting shapes from nature and think about how to use them in furniture. Matter of fact, I'm looking out the window now and see an armrest in a shrub branch bending from heavy wet snow...

Re: Level 1

#28

Re: Already on your way

William Duffield

Following the thought in Bob's third paragraph, and if you like early American furniture, there is a book with photographs that compares similar pieces of furniture and describes the authors' opinions on why some are better than others. Of course, some of the selection is for wood selection and decorative details, but a lot of it is form and proportion as well.

However, you won't find and A&C or Shaker or Studio Furniture examples in it.

The New Fine Points of Furniture, by Israel and Albert Sack.

Used copies are inexpensive, and Amazon will show you examples of what is inside before you decide whether you want to buy it.

http://www.amazon.com/New-Fine-Points-Furniture-Masterpiece/dp/051758820X/ref=sr_1_1?s=books&ie=UTF8&qid=1422651018&sr=1-1&keywords=sack+good+superior+masterpiece

Re: Level 1

#29

Only one quibble with any of what they taught...

John in NM

Not considering joinery in the design is very risky. It works just fine when a builder understands joinery limitations, but if not the designer tends to come up with unbuildable stuff.

That was probably the biggest frustration working in a custom shop (other than the low pay of course :D ) - the designer would send you something impossible and expect you to figure it out with no modification to the outward appearance.

I think the reason that this advice works for people who understand joinery is that it's simply not possible for them to ignore the limitations imposed on us by joinery. It's kind of like the "sky hook" that engineers joke about - it's a joke because they all know that stuff just doesn't levitate on it's own :D

Re: Level 1

#30

I suspect he's referring to SF community college

John in NM

If I remember correctly they have a craft oriented program. I never paid very close attention though since I live a couple hours away and have a very odd work schedule.

I'll ask on Thursday if you like, Merle, Jess and I are having lunch.

Re: Level 1

#31

Re: I suspect he's referring to SF community colle

Jesse Cloud

Oops. Sorry I failed to reply to your question. John is right, I took Fine Woodworking courses in the art department at Santa Fe Community College. I think a few other colleges offer programs open/practical for amateurs, but as John pointed out, you pretty much have to live nearby. Another challenge is finding a teacher interested in the type of furniture you favor. Steve Latta would probably enjoy discussing moulding, but SFCC discouraged it.