Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

26 Jan 2015

Good Morning Everyone,

I've been wrestling with a plug-in or a virus on my home PC and I'm having to use another computer to get this done while I try and figure out what's going on with my home machine. This is the first time in MANY years that I've picked up something on the web that is causing my Google Chrome to keep asking me to install Flash Player and media player 12.2....I just keep ignoring it all and try to get by while I try and figure this out. If you know what this is, please let me know.

My youngest son and I worked on getting the last task done in the MIL's apartment. Under counter lighting installed, pantry lighting installed, and a bit of caulk touch up. I am now officially done with the MIL's apartment.!!!!

I start oncall duty today and I'm not real thrilled about it but it is what it is.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Remove the Malware

David Yoho

You've got a bit of malware that is causing your issue. The easiest way I know to rid your computer of this is to run the free Malwarebytes program. If you don't have it, Google will find it for you. You can either download it from another computer onto a USB flash drive and then to your infected computer or straight to your infected computer. Usually after downloading and installing Malwarebytes wants to check for updates before running a scan.

I finished the rehab work on my screened door. I painted it, installed new screen, attached the hardware, and hung it yesterday. It's good to go for another 10 years at least.

Re: WC Weekend Accomplishments....

#3

Spice Box drawers "done"..at last!

Bill Tindall, E.Tn.


18 drawers, 72 dovetail joints, 176 tails, 704 saw cuts to define tails and pins, 424 pieces of waste to chisel out. The marathon is done.

Well not quite. Still need to fit the bottoms, veneer the fronts and tidy up fit of drawers to opening.

I will report separately on the details of techniques used and some handy tips gleaned along the way. One tip is to amply label parts. It is every so easy to mix up front to back, inside to outside, top to bottom and get a cut in the wrong place.

Re: WC Weekend Accomplishments....

#4

So

Mark Mandell - Gone Round In New Jersey

"F" is for front and "B" is for . . . ." :D

Re: WC Weekend Accomplishments....

#5

Re: Spice Box drawers "done"..at last!

Joe in a Cleveland suburb

Those are going to be beautiful when done.

Can't wait to see.

p.s.

I don't suppose you'd want to trade a hardly ever used Shaper for some of that walnut... :D

Re: WC Weekend Accomplishments....

#6

Poured concrete

John in NM

Just a couple steps, nothing major. Still wondering when I'll learn not to come home for my week off!

Re: WC Weekend Accomplishments....

#7

Re: Spice Box drawers "done"..at last!

Bill Tindall, E.Tn.

No, but I would use my connections to find you some walnut.

Re: WC Weekend Accomplishments....

#8

"B" is for back......

Bill Tindall, E.Tn.

as in the "back" facing side of the "back" piece of the drawer that although symmetrical at this point was put in its hole "back"wards to store it while the glue dried. Now I'm confused. :)

On a more serious note for the confused bystanders, before dovetailing the parts are labeled in relation to how the drawer will be assembled, not how it goes into the case. Because the pins are hand cut they only mate with the corresponding piece the pins were marked from (the tails). Hence, one must keep track of each surface of the 4 drawer parts during preparation of the joinery. When the glue gets applied in the race to get the parts together confusion of who goes where must be lessened. Another place to screw up is cutting the rabbit for the drawer bottom on the wrong surface (avoided that one) but I did cut one set of pins backward and had to make a new "back".

Re: WC Weekend Accomplishments....

#9

As in....."Baby Got Back" ???......

roger lance

probably not..... :D

Re: WC Weekend Accomplishments....

#10

Re: "B" is for back......

Mark Mandell - Gone Round In New Jersey

I knew that . . . . :D