Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Treating Cutting Boards with Mineral Oil

Posts

Re: Treating Cutting Boards with Mineral Oil

#26

Re: Frying pans

Mark Mandell - Gone Round In New Jersey

Watch that "antiseptic" stuff.

I've gotten into several discussions on wood cutting boards and such. There is research that says the wood boards don't "promote" the growth of food-derived bacteria, but it's quite another to ascribe the Antiseptic label to them.

Working in the produce industry as I do, all my clients (and me) treat every surface that contacts raw food with either chlorine or peroxide bleach or some form of sodium chloride. There is no substitute for food safety.

Cross contamination of raw meat bacteria with raw vegetables is a continuing problem, and a wood cutting board will NOT help the issue any more than a plastic one will do so.

Rant off ;)

Re: Treating Cutting Boards with Mineral Oil

#27

you can see that I agree

Bill Tindall, E.Tn.

Most of these family heirloom pans have not been shiny in more than 50 years. And the counter top simply gets scraped, unless it has been used for raw meat.

I understand that when dealing with the general public that real food allergies and compromised immune systems must be accommodated.

Re: Treating Cutting Boards with Mineral Oil

#28

Re: you can see that I agree

Keith Newton

Bill, When you get a deer, or butcher a farm animal, is that where you work, or do you have another board that you work on?

Re: Treating Cutting Boards with Mineral Oil

#29

Concern

Mark Mandell - Gone Round In New Jersey

starts at home, Bill. I won't ask my family to accept a risk that I won't pass on to a stranger. True, I may have information about my family's medical history coloring my view of things, but such things can change without my knowledge.

Moreover, as we get older we tend to forget that that robust immune system that has protected us for all of those decades does, despite our best efforts, get weaker as we age. When we're 70 we'd best not risk ignoring that risk we so blithely ignored at 40.

Lost my father, mentor, and teacher to Listeria Encephalitis when, at the young age of 76 he neglected to wash the seedless grapes he bought from the street-corner vendor on the way home before he ate them; just as he'd done for 40 years.

Re: Treating Cutting Boards with Mineral Oil

#30

Re: Frying pans

TomD

That's fair, but at least it doesn't foster and aggrevate the situation, as far as we know. There ought to be some common sense way to handle it.

Re: Treating Cutting Boards with Mineral Oil

#31

Some Common Sense Ways

Mark Mandell - Gone Round In New Jersey

Use multiple cutting surfaces, each designated for a particular use. We go so far as to color code, green for veg, blue for fruits, white for raw protein. They all get swabbed with chlorox after use and then run in the dish washer. The research I mentioned indicated that plastic boards were harder to clean because their surfaces tended to hide bacteria better than wood surfaces. My clients who process produce for resale switch boards with every change in commodity because they have to be able to trace any potential source of a pathogen like e-coli, listeria or the other common food-born germs.

I have several wood cutting/carving boards. After use (even with "cooked" meat) they're washed with suds and then scrubbed with salt which has been the prevailing method of sanitizing wood boards for generations.

Workflow in preparation is also very important. Preparing protein last and on a separate cutting board can go a long way toward preventing cross-contamination. Last study I saw found 97% of raw chicken in supermarkets was contaminated with one of several pathogens. Make your dinner salad first and put it back in the fridge or well out of the way before you work on the bird, and be sure you wash your hands and tools well before handling your next food item or reusing that knife so that you don't transmit those bugs by touch. Those "Safe Handling" stickers you see on meat and other packages in your market are not there for decoration or just the company's lawyer's effort to prevent lawsuits. They should be read and followed.

Food safety and safe handling have become far more of an issue for all of us than they were for our grandparents and past generations. The volume and speed required for modern growing and processing of raw foodstuffs have created more opportunities for widespread problems. When someone gets sick, we can blame the the guy back up the chain, but our best opportunities for protection are right in our own kitchens.

[soap box away :) ]

Re: Treating Cutting Boards with Mineral Oil

#32

Meat cutting procedure

Bill Tindall, E.Tn.

Sawing and whacking is not kind to a wood block, especially one that isn't end grain. For these tasks I have a "utility" block that sits upon the counter. After service this black is washed, spritzed with bleach , rinsed, dried and re-oiled.

Re: Treating Cutting Boards with Mineral Oil

#33

The Right Way!


Re: Treating Cutting Boards with Mineral Oil

#34

Bart Goldberg

Re: Treenware Treatment

Bart Goldberg

Mark,

I am interested in trying out your method/recipe. Can you please clarify a few items for me.

1) Are you using the original Waterlox sealer/finish?

2) How are you applying the Waterlox?

- Do you let it sit in a bath of finish or are you just rubbing it on?

3) What is the exact recipe and proportion of your wax/mineral oil/beeswax mix?

Thanks

Bart

Re: Treating Cutting Boards with Mineral Oil

#35

Oil

Mark Mandell - Gone Round In New Jersey

meaning non-drying oil (animal, vegetable, mineral, Olay) as opposed an drying/polymerizing oil finishes. After all, most any liquid, including water, will darken the wood; difference being how long it stays darkened.

Re: Treating Cutting Boards with Mineral Oil

#36

Re: Some Common Sense Ways

TomD

Mark, that wasn't really what I was after, more a comon sense way to deal with bowls that are being used to eat from, or present salad.

BUT Immensely useful!!! And being a 60s kind of guy, after reading, I immediately cut and pasted it to the wife.

Re: Treating Cutting Boards with Mineral Oil

#37

Re: Some Common Sense Ways

TomD

Oh, Thanks!

Re: Treating Cutting Boards with Mineral Oil

#38

Re: Treating Cutting Boards with Mineral Oil

TomD

Speaking of vet grade. Barns use huge quantities, and suppliers sell them in large containers, what is it used for?

Re: Treating Cutting Boards with Mineral Oil

#39

Bart Goldberg

Re: Treating Cutting Boards with Mineral Oil

Bart Goldberg

They give Mineral oil to horses (and perhaps other livestock as well) to treat colic.

Bart

Re: Treating Cutting Boards with Mineral Oil

#40

Oh

Mark Mandell - Gone Round In New Jersey

You're very welcome. Pass its along to others. Simple and easy things to do.