Not much for me over this past weekend. The MIL has brought me a couple of things that she wants done in her apartment and I tried to rest/relax a bit this past weekend because of other things like work and life things that I've been tending to.
My hope is that I will get back to the LOML Jr's blanket chest this week and see how much further I can get on it.
I'm also planning on building a 5-string bass. This will be my first instrument build and necessity is causing me to push harder to build a bass because the one that I want is over $4K.....I figure I can build one for far less than that...and I guess we'll see as that time approaches.
That's it for me...so what did YOU do this past weekend?
No woodworking. I did manage to salvage maybe 800-1000 pounds of beech firewood from a small mountain of wood that a neighbor dumped at the side of the road in hopes that the city crew might (not bloody likely in my experience) pick it up on their regular rounds. Seems a shame since this looks to have been one of the largest beech trees I've seen locally -- perhaps 24+ inches near the base -- an it looks to have been quite healthy. I only attempted salvage what I could get to and handle safely. Cut it into 16" pieces and stacked them along my driveway until I could haul them to the covered storage in the back of the Subie. Paid the price for the 'free' firewood last night.
Would it be worthwhile salvaging any of the bigger stuff for woodworking projects? I notice that many wooden planes are made of beech but those seem to be the European version. I could probably cut and air dry some reasonable pieces if it ever stops raining for long enough.
This weekend I bent the stocks of two shotguns, turning a long-standing ambition into an accomplishment.
Having never done it before, I stood on Bob Smalser's shoulders. Thank you, Mr. Smalser.
Shop still reeks of peanut oil, and I have no notion of where to store the outsized bending jig, but the work went well (OK, pretty well - I over heated the first one enough to give the pistol grip a tan) and I now have two guns that line up correctly when I point at something.
Even a blind squirrel picks up an occasional nut...
....352 saw kerfs, and 248 chiseled out waste pieces turned these 36 drawer sides into 36 drawer sides with 176 dovetails. That is half the parts for these 18 drawer. Whoohoo! Tedious.
Had our family gathering, and got historic award *LINK*
Keith Newton
Our family seasonal gathering is always after the season, so everyone from both sides of a union aren't torn between families, so we were all together last weekend.
But Friday evening was the Historic Preservation Alliance of Arkansas presentation of awards to recognize those who have done projects of note around the state. I was surprised to have been chosen as the craftsman, for a project that I finished around this time last year, but started about 30 years ago.
I went not expecting it to be much, although it was $100 a plate ticket price. But there were probably 300 people there, many of whom I know, and or know of through the news. I was certainly honored and humbled to be there breathing the same air with so many notable people.
The reason it took 30 years, is that the owner back then, had bought from a salvage company the turned portion of the post, which I lengthened to make them work, as well as build the deck and roof structure.
A couple of years ago, I was walking Sassy up the street, when I spotted the current owners bringing groceries from the car. I called over that I like their house,,,,,,,,, especially the porch. They looked at me with a confused look. Then I told them I had built it. They insisted I come over to visit.
About a year later, they had bought more balusters, brackets and spandrels from two other houses of this vintage which were torn down a few blocks from the Capital. There were only about half as much as I needed, and more than I wanted to turn. I don't pretend to be a spindle turner, but found William Simmons over on the turning side of WC, so he deserves as much credit for my award as I do.
There were only a couple of the brackets, and they were all too tall, so I had to cut away some, and reconfigure the shapes, so they didn't infringe on the turned portion of the post.
Now that it is all finished, I'm probably more astounded than anyone, that it turned out looking like those parts were all designed for this house, and had always been there. I guess I'm just lucky. The blind hog scores again. ha
The chisels are home made because I am cheap. They were made about 10 years ago from Crucible Products CPM 3V steel. Making them was as simple task that involved little metal working skill or equipment (grinder and a file). They are ugly but serviceable. They fit into the tight places in dovetails.
This steel is exceptional tough at high hardness, just what is needed for chisel durability. The chisels were touched up at the start and they are still fine at the end. My sharpening procedure is hollow grind, hone with 15 micron diamond paste on cast iron and polish with some of the green stuff rubbed on leather.
The edge dulls by deforming. rubbing on a hard Arkansas stone followed by the leather and green stuff is used to touch up.
This is not an easy question to answer and it may be that no one cares about a detailed answer anyway.
I have come to believe that the ergonomics of the chisel trump the steel. And ergonomics get very personal. The chisels I made, by dumb luck, work exceptionally well for dovetail making and serve adequately for paring, something I don't do as much as dovetailing. The thin blades (0.140" thickness) and steeply beveled sides fit handily into dovetail corners. I find no need for a skew chisel. The short length and lightweight handle make guiding the chisel into scribe lines efficient and paring with the short blade is fine with me.
The Veritas chisel is similarly lightweight and the handle is comfy. But the blades are thicker than what I have come to prefer. I will likely grind the chisel I have thinner when I get around to it. The cost for a set is daunting. For dovetailing I find a lot of sizes between 3/16 and 5/8" handy to have. Mine were made for less than $5 each and I use a lot of sizes.
When we made the CPM 3V tools the recommendations were to heat treat to Rc58-60. This hardness leaves the tools exceptionally tough. They can actually be bent and then restraightened without breaking. Since, it has been learned that a greater hardness is more optimum for a chisel. Comparing 3V at Rc58 vs PMV11, the PMV11 has an edge on edge durability, in my hands. 3V treated to Rc 60 may be equivalent, but that is speculation.
O-1 at Rc 60 is plenty good enough. Get a knife maker to saw out blanks, file and grind to shape, send off for heat treating, mount a handle and you are in business. A-2 for chisels makes no sense.