Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Projects finished

Posts

Projects finished

#1

Projects finished

McKay

I have had the flu for the past two days, but I was able to finish the 7 sea chests for my wife and children.



This first one is of Stargazer lilys. The white is holly and the red is Nicaraguan redheart.



This is a profile of a mountain that is about 4 miles from my back door. The white is holly again, and the dark is figured walnut. The chest is QSWO.



These are supposed to be pansies. I believe that the yellow is osage orange.



These pansies are padouk and the osage orange.



My oldest daughter is a nurse practitioner so I cut out the the area and filled it with black epoxy. I could have used ebony, but if you have ever used ebony, then you know how brittle it is to work with.



These flowers are black eyed susans. I made a mistake and used dyed pine for some of the petals. They faded a lot and the brighter petals are osage orange. I wish that I would have dumped the pine entirely.

I draw bored all of the bread boards with the middle tenon glued and the front and back not glued to allow for expansion/contraction. Draw boring is really the only way to go when you need a tight fit and no glue.




The dovetails are all hand cut at 8 deg on a compound angle.

Re: Projects finished

#2

How did you handle the beckets?

Gary Smyth

Very nice. A terrific gift for life.

Re: Projects finished

#3

Gary, are you...

McKay

Are you talking about the rope handles? I took a 43" piece of hemp rope, pulled the three strands and re-wound into the handle that you see.

The brackets are 8/4 stock that has been drilled, shaped and sanded to accept the rope handle.


Re: Projects finished

#4

Yes,the rope

Gary Smyth

The rope handles are the beckets. From what I can see the rope is spliced into a doughnut and through the center hole in the bracket. The wood bracket mounted vertically. Is that correct?

Re: Projects finished

#5

Re: Projects finished

Rum

Your layout and use of colors in the wood is just outstanding! Bravo!

Something about the seemingly simple yet evocative designs really sings there.

Re: Projects finished

#6

A.J. Hamler

Re: Projects finished

A.J. Hamler

I'm curious about the hinges you used. Do you have a shot of those?

A.J.

Re: Projects finished

#7

Re: Projects finished

Joanne in Point Pleasant, PA

Wow. These are gorgeous! They will be treasured!

fyi--I only see a broken link on the second picture (mountain view).

Re: Projects finished

#8

Re: Projects finished

bradkansas

I have but one word for you -WOW!!!!!

Re: Projects finished

#9

AJ ---hinges

McKay

I actually thought that I purchased the hinges from LV, but I could not find them last week when I needed an additional pair. I found some at van dyke's restoration

http://www.vandykes.com/classic-hardware-classic-iron-fleur-de-lys-hinge/p/215573/

I put the short leg in a vise and bent it at the 8deg for the back of the chest.

FW had an article on this chest by Chris Gochnour awhile back. Chris teaches every January at a school in Ephraim Utah. That is where I built the first chest. These make a total of 8 that I have done.

Re: Projects finished

#10

A.J. Hamler

Thanks!