Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

8 Dec 2014

Good Morning Everyone,

My youngest son and I have been working on the old cedar chest restoration project. This thing has really seen a lot of hard times. Many of the old glue joints have turned loose and some of the end-joints have come apart. The good news is that we have almost finished putting all 4 sides of the chest back together with new glue joints that appear to be holding well.

The hard part for me is that this thing has been repaired a couple of times before and reworking what others have already fixed before is proving to be a real challenge.

Played bass guitar at church on Sunday and I am working on advancing my bass playing skills so that I can play true jazz bass. I expect this will take a lot of time in both study and practice.

Well, that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#3

Alan Young

That is the best shop auxiliary I have ever seen.

Alan Young

My Biesemeyer fence suffers from the same disease- I know I will never change my behavior- so why not compensate?! What a great solution!

-Alan

Re: WC Weekend Accomplishments....

#4

Safety issue in my opinion

Bill Tindall, E.Tn.

I think storing stuff on the table saw is a safety issue. I think having anything on the table of a table saw other than what is to be sawed and its guidance system is a potential safety hazard. Maybe if you never had anything that should not have been on the table find its way into the blade you would not agree but you will become a believer if a screw driver ever gets inadvertently knocked into the blade.

Re: WC Weekend Accomplishments....

#5

Re: Safety issue in my opinion

roger lance

Not everyday do I agree with Bill.....but I sure do here.....that's not safe.....its a potential disaster and you should avoid creating those situations.....there has to be a better storage place in your shop than that.....Rod.....what would Norm do ??

Re: WC Weekend Accomplishments....

#6

Coffee Table

Bill Tindall, E.Tn.



A day before Thanksgiving daughter called and asked if "we" were going to build the coffee table I had offered some months earlier. I was heavy into the middle of the Spice boxes and deer hunting, but it was a daughter request and required priority I had proposed a simple table, 4-legs and a tile top from some spiffy tile I found in the reminder section of a tile store in Ashevill. Then things got more complicated, to wit:

It needs to have drawers, deep enough to be useful. I want something that doesn't have boring legs, maybe a flared leg. Oh, and my husband Mike who has never done any furniture building would like to participate and get most of it done over the holidays. No problem!!!

Turned out Mike has the patience of Job and good hand skills to go with this useful woodworking trait. I offered advice and did machine set up and he did the work. Best M&T joints to ever come out of my shop. But I must say the 10 hour days were stressful on me. We got all the way to starting to dovetail the drawers. I have been tidying up the details and it is ready to finish. The legs look fat in the PIC but they look nicely proportioned in reality.

Re: WC Weekend Accomplishments....

#7

PS

Bill Tindall, E.Tn.

check out the grain I found for the drawer fronts. I have been eyeing this piece of wood for some time waiting for a use for it.

Re: WC Weekend Accomplishments....

#8

Re: Safety issue in my opinion

Mark

Have too agree, I learned the hard way with just a little scrap corner of wood that I laid on the fence right before it became a projectile.

I hate to imagine the damage a screw driver could do.

Re: WC Weekend Accomplishments....

#9

Re: Safety issue in my opinion

Barry Irby

I can tell you from personal experience this is a bad idea. I used to use the top of my fence for a few things like a pencil and whatever. I had a Brush glued to the under side of my insert to improve dust collection. The epoxy failed and I laid it on top the fence. It fell onto the blade and in less than an instant it hit the back of my opinionated finger on my right hand. A nasty cut. I still have the scar that looks like a WI-FY symbol. In spite of my stupidity I feel lucky. Could have been an Eye or worse. Don't leave stuff on top of the fence.

Re: WC Weekend Accomplishments....

#10

Re: Safety issue in my opinion

Thomas S Stockton

I think that Rod's idea is safer than what he had before. looks like everything is held in place pretty securely and isn't going to fly out.

bottom line of anything is if you don't feel it's safe don't do it. The world needs less safety police and Rod knows what he's doing and what works for him.

Tom

Re: WC Weekend Accomplishments....

#11

Re: Safety issue in my opinion

Bob Entwisle in NJ

Amen, Thomas!

An elegant solution that may be applied to my cluttered Bies in the near future!

Bob in NJ

Re: WC Weekend Accomplishments....

#12

Re: Safety issue in my opinion

roger lance

What the world needs are more people with a little backbone who don't leave because someone disagrees with them.....and also, less people who are stuck in Junior High and given to using phrases like "safety police" to advance their retorts.

Re: WC Weekend Accomplishments....

#13

Re: PS

Joe in a Cleveland suburb

I like the table. I did notice, as you mention, the legs look a little fat but figured it was just a camera angle thing.

I did notice the walnut for the drawer fronts too. Looks great. I'd like to see it with finish on it. Your finishing technique always looks good on walnut.

If you have any of that nice walnut to sell, let me know. :) Oh, if you want to trade some of that nice walnut (or Cherry) for a super nice hardly ever used Delta Shaper (see the classifieds) let me know... :D

Re: WC Weekend Accomplishments....

#14

Jason Roehl in Lafayette, IN

Re: Safety issue in my opinion

Jason Roehl in Lafayette, IN

Some people don't care to continually rehash the same arguments that lead nowhere.

The problem as I see it is that we are in a culture of safety police. And that's not a flippant Junior High term. It's because it has a real effect on many of us, whether we own a business or are buying a house, and many of us are tired of the constant buildup of regulations from those who know what's best for us. That's out in the world.

To-wit: the electrical code(s). There are many good "rules" in the electrical code that have advanced safety. No question. The problem is that there are still groups that comes up with new rules as their only occupation. So a rule 50 years ago would help eliminate 90% of electrical fires, which were a large number. Now there are very few, so eliminating 90% of electrical fires is of dubious benefit ("if it just saves ONE person...!"), at an ever-increasing cost (the principle of diminishing returns).

On internet fora, it's often a race to the top (which is really the bottom, IMHO). That is, if somebody thinks a particular operation is unsafe, it's an instant pile-on of who can describe how foolproof their own safety procedures are.

And it often comes with chest-thumping and shaming.

Jason

Re: WC Weekend Accomplishments....

#15

Re: Safety issue in my opinion

roger lance

Jason.....a key word in the topic line of all these entries is "OPINION".....I don't believe that anyone is trying to limit freedom via regulation/safety rules.....just voicing an opinion of what they think might be dangerous.....many accomplished, experience woodworkers have expressed their approval of Rod's tool storage method.....others, who are also accomplished, have a different point of view. I can live with that.