Thanks for the reply. This is exactly what I'm trying to avoid. Seems like you either are happy with grizzly or very upset. Wish your experience would have been better.
Still on the fence. The extra capacity of the 12" would be a nice benefit, but only if it is a quality machine. Having fought with a jointer that was not flat, I don't want to go through that again
Stephen, I too will be picking this up driving 2 hours to the Springfield store.
I called to see if I could pop the crate and check bed and fence flatness. They said no. So I guess I'll have to return it later if I run into disappointments.
I have a cargo trailer but with a drop down door ramp. Should I take it or just my truck?
I could list off about a hundred jointer makes without ever mentioning Powermatic , Delta, Grizzly or General, and if you asked me to make a list.... they wouldnt even make it on the list. C'mon get your heads up and look around, there is a whole world of great machines. The first jointer was patented in 1866, hundreds of manufacturers have made thousands of machines every year since then.
Click the dropdown and choose jointers to see the list.
Most classic old jointers are heavy duty cast iron machines with virtually no moving parts and therefore will last almost forever. There are hundreds of thousands of used machines still sitting around waiting for people to find them.
First you have to figure out what you want to use it for, ie; stock size.
What space restrictions if any that you have.
Power supply / restrictions, that you have...Amps, HP, volts, single or three phase?
Do you want disposable blades, straight, staggered or shear.
Have you seen or used staggered insert blades, Tersa head straight blades, Or a standard straight blade machine that has had the knives jointed?
How do you plan on sharpening the blades? Sending them out, inshop, or replace.
Do you have any access restrictions; it tough getting a 3000Lb cast iron jointer down the basement stairs.
Do you have any weight restrictions, wood floorjoice or concrete.
Do you want or have the interest in doing a rebuild on an old machine.
Keep in mind new doesn't mean that it flat and true and old doesn't mean that its not.
What style of jointer?: Cantilevered wedge-bed, supported wedge-bed parallelogram
Do you want an old classic cast iron or a relatively new sheet metal machine from the 70's on.
this is my 20" 1950's wadkin, it has a slight shear cut head, parralelogram adjustment, A beautiful heavy duty machine , dependable, true and solid as a rock.
Old machines that have been rebuilt a things of beauty and a joy to work with, and i hope to get around to rebuilding my Wadkin one day soon
Then you have the two sided, right angle jointers:
And the new high end machines.
For $2000 you could get a great older machine that would cost $20,000 or more at todays price. On a limited budget, i would always go for a used machine, you will get ten times more machine then you would buying a new one.
I agree on the old iron, it can be of very high qualityif you are patient and have a source of supply. I have been unable to locate something close to me, (Minneapolis)
I had an old parallel wedge bed 16" jointer, (a very early northfield). Many would call me nuts for getting rid of it. I completely went through the machine.....except flattening the tables. They cost to flatten them was not worth the effort as it only had a two knife cutterhead. The cut quality was so-so. And the cost to get the machine up to snuff would have been prohibitive.
I picked it up before I knew what to look for. I spent way to much time and effort becoming a tool refurbisher instead of a woodworker. Yes it was rewarding to go through the exercise, but when I was through I still didn't have a tool that would produce a nice glue joint. All that was before I had four little kids. My free time to tackle such a project is much more limited now.
If I had a line on a decent used machine that I knew wasn't worn out or needed a ton of work to refurb it, I would be interested, but those type of machines are difficult to find.....unless you have a place to look?
The auction sites are typically crazy high as it gets to be a contest for some of the bidders.
I could swing by the northfield factory...it's only 30 miles away, they make AWESOME new machines that look and operate like great old iron, but they are closer to $15k and WAY out of my budget.
I checked in with tried and true tools, a local used reseller, and they don't have anything to speak of currently on hand.