Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Janka hardness test for hardwoods

Posts

Janka hardness test for hardwoods

#1

Janka hardness test for hardwoods

Jim Pugh

Recently someone was looking for the Janka hardness info. I just happened on this in a folder today. http://ejmas.com/tin/2009tin/tinart_goldstein_0904.html

Hope it helps.

Re: Janka hardness test for hardwoods

#2

Thanks Jim, That is a great link. *LINK*

Keith Newton

Except for the part where the Buloke, Allocasuarina luehmannii, is missing from the top of the list at Janka Hardness of 5060 lbf. But maybe that is because at that hardness, who the heck in their right mind would want to work with it? ha

What I was wishing for, was to find list for the other properties, such as tension, shear, bending etc.

I like that your link also shows the weight, and rupture. I find it interesting that there can be quite a bit of difference between which ones excel at rupture, may differ from the janka.

Here is the link that I mentioned earlier.


http://en.wikipedia.org/wiki/Janka_hardness_test

Re: Janka hardness test for hardwoods

#3

Re: Thanks Jim, That is a great link.

William Duffield

I'm sure the data that the USDA FPL publishes is in the public domain, since the research is paid for by taxpayers' dollars. The copyright for the data published by Ken Goldstein probably only applies to the formatting (html) of the page and whatever original words he wrote. He doesn't even site his sources for the data itself, but I seriously doubt he could make any claims to having made the measurements himself or to have originally published them. The value of the data is further diminished due to the lack of scientific species names and taxonomic authority. Providing only one value of a property for a whole species, when both genetic and environmental diversity can be extreme, isn't very useful for performing engineering calculations. It is reasonable to expect that in many cases a very limited number of samples were available for testing, so mean and distribution values have not been determined. Probably, many institutions have done wood physical properties testing, but some of it is proprietary (trade secrets of private corporations), a lot of it is unorganized, and varying measurement units and test procedures are utilized. But, even with the limitations, what is known could be organized into a much more useful form, made available to the general public, and updated as new data is found.

It appears that Wilipedia support data in Excel format. http://commons.wikimedia.org/wiki/Category:Microsoft_Excel