Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Cerused wood

Posts

Re: Cerused wood

#26

Re: Cerused wood

William Duffield

Your bench looks really good.

The oil based Pore-O-Pac (also by Behlens) definitely would not work with

TransTint. Well, Jeff Jewett does describe some magic using acetone that will work with oil based finishes under some very limited conditions.

When I want to tint the pores, I usually use oil paints, or artist's colors, or Colors in Oil. I especially like the effect of pores that are a few shades darker than the rest of the wood, but with the same hue, on QSWO on A&C pieces, but I don't think Stickley would agree with me. When I say artist's colors, I mean ground, powdered earth pigments. These are the same dirts you would mix with linseed oil (and/or other secret ingredients) to make oil paints.

Earth pigments tend to hold their color for a lot longer than metalized dyes, but the dyes are good enough that no one will notice the fading in our lifetimes.

When you get to the Borg, the unbreakable switch plates are easy to distinguish from the regular, cheaper plates, because you can twist them without shattering them. They also make great scrapers for ice on car windows.