Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Biscuit question

Posts

Re: Biscuit question

#26

Re: Biscuit question

William Duffield

It would also happen with Dominos or any other loose tenon joinery system. Of course, the solution to the problem is planning your scheduling ahead of time so you do not feel rushed as a deadline approaches. Or, use epoxy, which has its own set of problems, but at least doesn't swell the wood.

Re: Biscuit question

#27

I'm with David,

Keith Newton

you beat me to it. I never try to put glue in the slots.

If you've done a good job of preparing both faces, then the glue line is supposed to be stronger than the wood on each side of it, so why bother!!!!?

Re: Biscuit question

#28

Re: Biscuit question

TomD

"Sure they will but like others have said they won't add any strength to the edge joined work."

That isn't really true, the fact that edge jointed wood glues up at 100% strength does not mean that adding a biscuit will not add strength. It may not usefully add strength, but it would certainly add strength.

Re: Biscuit question

#29

one last effort

Dick Coers

Those are neither flake board (unless by that you mean you can flake the pieces off with your finger nail) or OSB. There were really cheap biscuits out for a time that were made on bad tooling. The sheared/stamped edges were rough and little pieces could break off. But to call them flake board would be misleading at the least. I only use off brand biscuits when I neglect to order Lamello stock in time. I did see those cheap ones with splintered edges, but I assure you, they were made of solid beech.

Re: Biscuit question

#30

Keep a'Pluggin'

Mark Mandell - Gone Round In New Jersey

Yeah, Dick, Looks like I got cheepies as they'll come apart with just a finger nail; in flakes. Of course, after sitting in the cabinet for about 10-15 years I guess I should put'em in the compost bin and get some good'uns, eh? I never depend on them for strength; I know how to prepare a glue joint's faces. I only used them for registration aids for the top side of a panel glue up or edge banding cab ply.