I need a couple of batteries rebuilt and of course my computer quite on me and do noe have any addresses for them any more. There is one from Marion, Ohio that I used a few times. Does anyone know their web address? Of course I`d consider any other places if you liked them Thank you. Larry
I tried one of the rebuilders, I think "prime-cell" or some name. Between the cost and the 2-way shipping, it was close to the cost of a new battery anyway. Instead, for a battery pack that goes together with screws, I took one apart, bought new cells at the local electronic shop, and rebuilt my own battery for about half the price, and put in stronger cells to boot. All you need is a soldering gun and a bit of patience.
I since gave the drill to one of my kids and have been buying Rigid drills with the lifetime free battery replacement guarantee.
Voltman is in Ontario, Ohio. I had a set rebuilt four-five years ago but declined to do it again. Cost was a factor. So was performance. The original batteries outlasted the rebuilt ones despite claims that 'we use fresher batteries'. Next I looked at rebuilding them myself...if I had several that needed rebuilding, maybe. But buying a new drill makes more sense of me. Just saying.
Take the battery pack apart. Check each cell individually they probably are not all bad. Then buy just the number you from electronics store or Batteries Plus and rebuild it yourself. Much cheaper. HTH
I personally was not impressed with Voltman quality either.
If you use a soldering iron to rebuild your own batteries, you will be shortening the life of the replacements by some amount. Any reputable rebuilder will use a spot welder. Of course, there are plans on the interwebs to build your own spot welder for batteries...
i have used this service and the battery that i had rebuilt for a friends weed eater work's better that new, the one orig. battery was 1500 ma which is 1.5 amp and he rebuilds with 2200 ma which is 2.2 amp which is very good, he up's the battery ma. so that they work here is the info phone on bottom so call and get price
YOU MUST SEND YOUR BATTERY TO US FOR REBUILDING/REFURBISHING
After we receive your battery(s), we inspect all components and replace all of the internal cells with new high quality ones. We then charge and test the battery pack prior to shipping. Our turn around time is 1 or 2 days here and right back to you. All of our batteries have a one year warranty
____________________________
$$$$Check out below to find ways to save money$$$$
Get a $3 per battery credit on orders of 3 or 4 being rebuilt at one time,
OR
Get a $4 off per battery credit on orders of 5 or more being rebuilt a one time
Mix and match brands and voltages
[Credit will be given to you when we ship your batteries back to you.]
_________________________________
If you have more batteries to be rebuilt, please click on your brand below to make your purchase.
Black & Decker /Bosch/Craftsman/Delta/Dewalt/Hilti/Hitachi/Milwaukee/Panasonic/Porter Cable/Skil/Snap-On/Wagner
ANY QUESTIONS PLEASE Email OR CALL (509)782-1269 (8-6 PACIFIC TIME)
Mean to imply that I have used Voltman because I have not. A different company rebuilt mine and. I am not sure of their name. They did not seem to last as long as the originals from Hitachi.
Voltman just seemed to be in the area the original poster was talking about.
I had batteries rebuilt once- mixed results, did it myself- mixed results. My recommendation, when the (NiCd or Nimh) batteries go, buy new lithium powered tools- soooo much better- much more power, longer shelf-life, battery indicator, no memory, lighter for the same amount of power.