Had a real busy week of working on the construction project. The good thing is that I can work inside with the A/C on.
Got the tile back-splash installed but still have to grout it. Got the master bedroom walk-in closet storage shelves and such installed, closet flooring installed, and base trim down. The closet is now complete. I have 5 pieces of crown molding left to cut and hang and then all the crown in the apartment will be done. Bought some Quickrete to mix and fill in the hole left in the garage floor where the old power service used to be. That is now complete. Floor installation will continue this week and my hope is that the bathroom work will be done so that part can be done and finished. Kitchen flooring will go in this week as well. I have plenty to keep me and both my sons busy for the entire week. I have been posting pictures on Facebook for my family and friends that don't live near us so they can keep up with the progress as well. Here's to a hopeful week full of total progress.
That's it for me, so what did YOU do this past weekend?
Found out that the small amount of rot in a couple of porch boards was more extensive rot in more boards - it's going to be a few days longer before we can paint it, because I need to replace about eight boards.
Got a chance this weekend to give the shop a cleaning and also throughly clean and lube the table saw and eliminate those shrill squeaks when the blade is raised/lowered. Then I turned my attention to a couple of shop tools whose fittings/hardware needed upgrading.
First, was my HTC roller table which I use as an out feed table for the table saw. I replaced the handle that HTC used to hold the height of the table with something more user friendly (the old one actually hurt my hands....and I don't have wimpy hands.....really I don't.....really).....
Second, I replaced the wheel units on my assembly table with units that have a lock mechanism.....no more having to place shims under the wheels to keep the table from moving around when you want it to be stable.....
Making these little shop improvements make your shop experience that much more enjoyable IMHO.
Finished/installed a pedestal to accomodate a RCBS JR3 press that a friend gave me. The mechanism of the press goes backward into a pocket in the pedestal.....for this reason, the press would not be able to be mounted to the bigger bench as it was built. I plan to use this singular press for bullet pulling and possibly as a universal de-primer.....
Took down my DC out in the garage and installed an IKEA wok as a retro vortex thang. We shall see if it works as advertised.
Parts arrived for my old chipper/shredder that I'm giving to my son for his first house. The fuel system was a full tear-down, plus the chipper blades needed to be sharpened. Got it back together, fired it up and proceeded to make dust out of 2" oak branches with little change in engine speed. Recon that'll do.
Bill.....bought them at Home Depot for about $10 each.....they are 4" wheels and roll over cords and other small shop obstructions.....seem well built (time will tell).....the locking mechanism can be applied by foot and is easily released and the locks hold very well....the wheel will not only not roll but will also not pivot with the lock applied.....I believe that HD also has a 5" locking wheel as well.
Got back this weekend from a trip to Ottawa, a half day with Rob at Lee Valley, visited a working 1850's saw mill in Ontario, a day at the Woodsman Competition and Fair in Boonville, NY and ended up in Atlanta at the International Woodworking Fair where I bought some stuff and begged some free stuff and saw a lot. Started design of two "spice box" jewelry boxes for granddaughters. More on all this later.
Will report on LV after I clear with Rob details of what I can report. For now I will just say awesome and suggest looking forward to the LV special fliers. It was encouraging to see that a combination of exceptional management and the latest technology can be competitive with low labor cost countries in making a quality product.
Motivated, at least in part, by Roger's relentless pursuit of order and harmony, I cleaned out my garage for the first time in 25 years. Most of the useable, but no longer needed, stuff went to the ReStore store, so it may get put to good use by someone.
The other, perhaps stronger, motivation came from my better half .
Before and after pictures would look pretty much the same to you, but big difference to me and got me out of doghouse at least for awhile.
I've been wanting to build a boat for a long time, I just wanted something fairly quick to make and not real expensive. Looking at plans some had estimated build times of of up to 1000 hours, I don't have that much time so I researched stitch and glue boats. A simple boat could be done in about 20 hours or so, just the ticket.
I bought the plans and started building it was all pretty straight forward and I think it probably took 40 hours but I got a little carried away here and there.
I'm pretty happy with it, next time I would do a little more complicated hull shape. I also know why epoxy isn't my favorite glue, it's just messy and gets everywhere.
This weekend I made the oars and finished the varnish.
all that's left is to get oarlocks and see if it floats. I also found a nice little honda 2hp motor for it at a good price.
Woodcraft sells them, too, in a few different wheel diameters, and in several configurations of swiveling and locking, but they're about twice as expensive as the HD casters.
You might be tempted to save some money by putting swiveling, locking casters on two legs and something with lesser capabilities on the other two. I found out this is really not a good idea. You need swiveling, locking casters on all four feet. That way, no matter which way you push or pull the table, there are two locking levers exposed (and two locking levers hidden where you can't reach them with your foot). While two locking wheels are enough to hold the table in one place, if you only have two locking casters, there's a 50% chance they will both be inaccessible. 2-1/2" or 3" casters have been big enough to mobilize anything in my shop. You might want larger casters if you felt like you needed to get a shopvac nozzle underneath.
I went to the cabin, out early both mornings. *LINK*
Keith Newton
This time of year, I wander inland, searching for where dragons sleep. I remember a few years ago finding my first few Halloween Pennants near this spot, and how excited I was to be able to capture my first really good images. This weekend, I found so many that I just walked past most of them, yet still probably shot 20 or more. I'm not after more of the same, but really trying to learn the habits of some that I'm having a hard time seeing, even when they are there, and they are skittish when I do.
I also found over a dozen Mantises, about half had recently molted and were only inches from their old skins / exuvia. They are mostly in their final adult stage, so I'm hoping that this weekend, I can find a mating pair, and catch her eating the males head off. Nothing like a little bug drama to start the day. ha
Follow the link below, and they are best if you view them full screen.
I should have noted how, and just tried to edit my post, but for some reason was blocked from trying, so I'll mention it here.
When the page opens, look in the upper right corner, there are two arrows pointing diagonally opposite. Click on that, and the images get larger. Then, if there is something that you want to zoom in on, move your cursor over the image and mouse click. The mouse roller will move the zoomed portion around. Then click it again to get back out of it, so you can click the arrow on the right side to go to the next image.
Some of these are not perfect. By the time I got slathered with bug spray, I still had a swarm of flying insects trying to get in my eyes, so I put on a headnet. This not only diffuses the light, but sorta captures the air around my face, while the RH is at the dew point, so my glasses tend to fog when I'm not moving, so I'm not always able to see as clearly as I'd like.
Then there is the issue of my knees. I'm still so stiff that I have a problem getting down low enough for some of these. And the depth of field is so darn shallow when working in macro mode, while hand holding the camera that just 1/8" movement in or out while trying to press the shutter button can make a difference in whether you can see a dragonfly's eye facets or not.
Your descriptions reinforce your expertise here Keith.
I have attempted some macro photography (insects) at my local arboretum, and get nowhere near the detail you capture under much more challenging conditions. I do marvel at the shots you manage to get in your local wetlands. I'm never sure how you get your models to stay posed in position long enough to even get the focus anywhere close! Inspiring work.
Larry.....glad to have provided a little motivation (I think ??).....but "relentless" is maybe overstated as I had that HTC table for 20 - 25 years before finally changing out that fitting.....more like "eventually relentless"
'Relentless' was meant to be tongue in cheek. I have admired your workshop, and your work, for quite awhile. Thanks for posting. Finding the motivation to straighten up my garage was one thing. Finding the motivation to straighten up my shop will take a lot more since there is a lot more to do. Seeing pictures of your shop may do the trick.
Thanks Larry....those are kind words.....it's kind of funny how long we will put up with something without addressing it.....even if the solution is simple....and I'm as guilty of this as anyone.
The diffuser is a very simple and easy to make piece of gear that I came up with maybe 5 - 6 year ago. I start with a welding rod which has good stiffness and spring memory. I bend a 360º loop in the middle ____O_____ . Then I bend the ends out and up like a pair of insect antennae. When I have the shape right, I spray the wire with contact, then lay it onto a white plastic grocery or trash bag, laying on the edge of the workbench. I then quickly fold the bag outside of the wire over, so it has some wrap around for the glue. The glue is still wet when I bring them together, but dry within a minute. I then trim it with scissors and wire cutters.
Squeezing the wires enlarges the loop, which allows it to slips over the lens barrel, then tightens when released. Since it is about half way between the flash and target, it doesn't need to be very large. Mine are about the size of my shirt pocket, so I can quickly remove and store it there, or pop it back on in seconds. But usually it stores In my fanny pack camera bag.
Since the on camera flash can easily be controlled, I normally set my flash about 2/3 stop under, unless I'm shooting something black, then I may bump it over by that much. I also set my exposure -1/3 also. This keeps from blowing out the whites, and is easy to brighten the rest in iPhoto.
You can use a regular wire coat-hanger to try it yourself. Find something about 20% smaller than the lens barrel to bend it around to account for springback, then clamp it in a vice to hold it while you wrap it around.
I also use a Raynox 150 macro lens which clips on front of my Canon SX50 long zoom powershot, so I have quite a range of zoom for composition.
THEN,,,,, I have another wire which goes around that lens, but the antennae angle out and downward, but instead of white diffuser plastic, it has the foil face from the inside of a chip bag glued to it, which reflect some of the light from the diffuser above back up to the underside of my subject to fill that in. I can't always use it though, sometime it get in the way, like when I'm down just about 1" above the water shooting a frog, or it may bump a twig that wiggles whatever my target is perched on, sending them off into the night.
Dang,,, it is hard to hit send sometimes. I'm giving up a lot of secrets here, but here goes.
I'm not sure what your setup is, and or how close you need to be. But it is tricky to get close enough sometimes, and I recall how frustrating it was back when I was starting out.
One thing I do, is to use my flash as a stun-gun. I like to set my ISO on 80, which is my slowest number, and f8 is the smallest aperture on my camera, although I wish for f11. Both of these settings will require a pretty hot flash, relative to the distance I'm working. Then as I approach something, I have a pretty good idea how close I can get before they are going to fly away, so I pop my flash, which I suppose temporarily blinds them, like it does us. Then I try to half my distance and pop them again, and half again, then pop again.
By this time, if they have not flown or jumped, I try to already have my zoom set, and already have a good idea how close I should be for the camera to find focus, so can get there pretty quickly then start shooting. I normally start shooting wider images, which gives better depth of field, then start working in with higher zoom and changing the composition after Ive gotten those first shot, I don't let up until I've gotten all I think will possibly work.
Another thing I do, is in the menu settings, to set the little focus square magnification on, so when I press the shutter button half way, the little square quadruples in size magnifying my meter point. This makes the details like a dragonfly eye facets much easier to see, so while holding the button half way, I can slowly move in and out, so that i can get the back edge of my focal plane on the closest edge of the eye, which maximizes most of the eye. Rule number 1. Always have the eyes in focus.
These tricks don't always work. The little male Calico Pennant next to last in this set is one which I've been really working to get. I've finally learned that they roost down low in the weeds which have the same color values that they have, and they are very skittish. I only managed to get two shots, and I was working quickly to get those off before it flew. There have been time where I used a long zoom on this species in daylight, but the green behind their clear wing portions distracts from their beauty. At night, I can usually isolate them from the background.
Give that a try, and let me know if it works for you. I've shared some more tips under AJ's question.