Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Completely OT TV repair question

Posts

Completely OT TV repair question

#1

Completely OT TV repair question

Barry Irby

My son has a Samsung TV that I use. Its a wide screen early HDTV with a CRT tube and about ten years old. Lately it has developed a lot of static with lots of spluttering and spitting. Sometimes you could give it a bonk on the corner and silence it. The last day or two it has started to turn itself of and on Over and over and over, about as fast as it could go. I tried using the manual power button on the front, to no avail. I unplugged it over night and that seemed to help, but only briefly. The remote still works, but won't stop the endless cycling. To be sure it is really off, I unplug it. I was wondering if unplugging it and leaving it a while would serve to reboot its internal computer. I took the batteries out of the remote, thinking maybe it was bad, did not help.

Time for the Geek Squad? I would take it to ?????, but it weighs too much to carry by myself. Any suggestions?

Re: Completely OT TV repair question

#2

Re: Completely OT TV repair question

Dustmaker Mike

Good bad news for you. Bad news is the TV is Toast and unpluging it like you are doing will not reboot it to make it happy. There is a board in it that has gone bad and will need to be replaced. You may be able to find someone to do it for you or if you put in your model number etc into google you may be able to find the problem and board.

Good news is you get to go TV shopping and get a lot better TV that uses a lot less power and has a great picture.

Re: Completely OT TV repair question

#3

Re: Completely OT TV repair question

Mike Potts

Barry, I turned my T.V. off back in 2000, haven't missed the bad NEWS, stupid shows or even sports. I have more time to do the things that are really important. Try it you may like it.

Mike

Re: Completely OT TV repair question

#4

Re: Completely OT TV repair question

Stuart Johnson

Do a Google search using the model number and brief trouble. You'll get a lot of hits to wade through but probably find an answer and how to fix it.

Re: Completely OT TV repair question

#5

Agree with Stuart

Joanne in Point Pleasant, PA

I have a newer Samsung flat screen tv that had 'lights on but nobody home'. I searched online and found other people with the exact problem (blown capacitor) and a gal on YouTube with a 15 minute video of exactly how she repaired hers. All I needed was a new capacitor and a newer soldering iron than my Dad's old "Ray Gun" that wasn't hot enough. Good as new. Not hard to fix. Old CRT's are different, but you may find someone with the info on how to fix that, too.

Re: Completely OT TV repair question

#6

Re: Completely OT TV repair question

BrianMonumentCO

Time for a new TV.

Re: Completely OT TV repair question

#7

Re: Completely OT TV repair question

del schisler

been in repair for 50 or so yrs, retired now i have fix a couple tv's but it is hard to tell for sure what's going on , but if it were me , i would remove the back , unplug first , now don't let the back drop down it could break the neck off of picture tube if it stick's out, take the interlock cord out of the back, their may be a clip holding it in the back , now plug set in and turn off and look and see if you can see any arcing on any of the board's or any where , if not probly the pc board what turn's the set off and on may be bad , now the arcing may be setting the tv off and on , also don't get up around the leed that goes up on to the picture tube, lot's of h hi voltage their , another thing with set unplug remove the board's and just put them back in and see if that help's, sometimes just setting on the pin's , it may loose comection , like a little corrosion their ? if i could see the set it sure would be easy for a fix, now here is where i get my PC board's , you can put in the model number of set and see what's in their, look for a remote board , it has the sencer that recieve's sig from remote to do it thing , turn on set change channel's and volume ect. that's about all i can tell you , just be careful , their are no hi voltage any where other than the anode on the picture tube, if you don't want to do the above a tv repair man is next , if set worked good before it could be that way again good luck the link http://www.shopjimmy.com/

Re: Completely OT TV repair question

#8

Re: Completely OT TV repair question

Bill Howatt

Taking you comments at face value, it sounds like the high-voltage for the CRT perhaps was arcing. The on/off cycling could be it starting up and then the power supply going into overload and tripping off which removes the load so it starts up again and trips out and...

If it needs a new board don't be surprised if they say they are no longer available and be prepared to pay for a diagnostic session if you don't get it fixed - it usually is applied towards the repair bill in some fashion.

TV's have dropped a lot in price and for a 10 year old set, especially with a CRT, you are better off to junk it and get a new one most likely. This is the way things are done these days but you know that.

Bill