Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

A "Pixelated" Vessel

Posts

A "Pixelated" Vessel

#1

Mark Meier (Ann Arbor, MI)

A "Pixelated" Vessel

Mark Meier (Ann Arbor, MI)

I've been experimenting trying to make a decorative container that looked as if it was made from stacking small blocks :)

Here are some pictures of my first attempt. This was cut from Baltic Birch plywood:


This was generated by a program I wrote starting with this 3D model of a form:


The program takes successive horizontal sections through the 3D form and changes the smooth curves into stepped or pixelated equivalents.


Each stepped curve is extruded to generate the 3D model:


The layers are cut on a 3-axis CNC. Each layer is aligned to its neighbors using dowels. Still needs some sanding and a finish.


Click here for a few more details of fabrication.

Mark

Re: A "Pixelated" Vessel

#2

Re: A "Pixelated" Vessel

Joanne in Point Pleasant, PA

Hmmm. Stargate Replicators.

Re: A "Pixelated" Vessel

#3

Re: A "Pixelated" Vessel

William Duffield

Looks like a perfect application for a 3D printer. In any case, it is an interesting concept, and an interesting vessel.

Re: A "Pixelated" Vessel

#4

Re: A "Pixelated" Vessel

Tom Sontag - St. Louis

An interesting idea and bonus points to you for pushing this envelope, but my honest feedback is that I like the original 3d form best.

Re: A "Pixelated" Vessel

#5

Reminds me of MC Escher art.

Keith Newton

Also modern military camouflage. Keep working this idea, the sell it to the military as the newest mess-kit, and you'll be a billionaire soon. Ha,,,except for that little problem of all those inside corners growing bacteria. ;-)

Re: A "Pixelated" Vessel

#6

Mark Meier (Ann Arbor, MI)

Re: A "Pixelated" Vessel

Mark Meier (Ann Arbor, MI)

Thanks for the comments, William.

My previous pictures didn't show the scale very well. It would be expensive to 3D print at full size - but that would be ideal for prototyping. The full form is 15" tall and 18" wide on a side.



Mark

Re: A "Pixelated" Vessel

#7

Mark Meier (Ann Arbor, MI)

Re: A "Pixelated" Vessel

Mark Meier (Ann Arbor, MI)

Thanks for the comment, Tom. Yes, it's definitely not for everyone. Most people I've shown it to have a polite smile drawn across their lips and a WTF written across their eyes!

Mark

Re: A "Pixelated" Vessel

#8

Re: A "Pixelated" Vessel

William Duffield

It wouldn't look right on a Sheraton sideboard,

http://images.google.com/search?newwindow=1&hl=en&site=imghp&tbm=isch&source=hp&biw=1664&bih=872&q=sideboard+contemporary&oq=sideboard+contemporary&gs_l=img.3..0.4385.10935.0.11267.22.12.0.10.10.0.90.696.11.11.0....0...1ac.1.48.img..1.21.710.U5-cUdaxoO4#hl=en&newwindow=1&q=sideboard+sheraton&tbm=isch

but on one of contemporary design, it would work just fine.

http://images.google.com/search?newwindow=1&hl=en&site=imghp&tbm=isch&source=hp&biw=1664&bih=872&q=sideboard+contemporary&oq=sideboard+contemporary&gs_l=img.3..0.4385.10935.0.11267.22.12.0.10.10.0.90.696.11.11.0....0...1ac.1.48.img..1.21.710.U5-cUdaxoO4

I'll bet you haven't shown it to an interior decorator.