I hope that each of you had a good Memorial Day Weekend. I was oncall until yesterday morning. I got to spend some much needed time working on the garage addition on our house. We are making good progress and all was well until one of the ceiling joist board broke at a knot and sent me falling through a bunch of stuff. I was able to catch myself on the side of my exposed existing how but not without some serious bruising. The LOML took me to the ER to have me checked and nothing was broken nor fractured. My side, shoulder, and hip caught the worst of it because I was grabbing anything I could to break my fall. I'm pretty stiff and sore today and I'm really nice and purple on my right side down to just above me knee. This will slow me down for a few days.
On to recovery for me and spent time with the family this weekend as well.
That's it for me, so what did YOU do this past Memorial Day weekend??
... a pretty hurtful weekend for you, Dennis. I'm glad you weren't more seriously injured. It's not often that joists break like that. I wonder if you can complain to the lumberyard?
We spent Saturday working around our house, then on Sunday, we took a bus to New York City and attended the Broadway musical, "Pippin." One of the principal actors is a close friend of our son's and has visited with us here in the country on several occasions, so we were invited backstage after the show. That was an amazing experience, to see the inner workings of a Broadway theater -- the costume area, the makeup department, the wig area, and most of all, the orchestra pit. It was great to meet and greet the other actors, too, many of whom have had notable careers in stage and television. We followed that up with a big reunion dinner with the kids and their friends in Greenwich Village and a nightcap at a local jazz club. Yesterday, Candy and I took the subway uptown to the Metropolitan Museum and checked out the Martin Guitar exhibit, which was part of a larger musical instrument exhibit that included lutes, harpsichords and other vintage woodworking marvels from Europe and America. I can't even imagine the amount of work that goes into one of those superbly inlaid harpsichords. Whew.
Today, it's business as usual. I hope you mend well.
We are going to sell the place next year and I'm in a race to get a pic of the dogwood in blossom on the left of the 2nd and the house at least first coated.
Sheesh, That sounds like it could have been worse *LINK*
Keith Newton
I spent most of the long weekend working down at the cabin, but managed to get out briefly a few times. While driving by one of my favorite birding and froging spots, I pulled in to look around, when up flew 2 males, and 2 females Blue Grosbeaks. Without even killing the engine, I grabbed the camera a managed to get off a few quick shots out the window of the two males, and one of the females. The way she was holding her wings out a bit, and looking up at her lovely mate a few feet away, leads me to think they may be planning to stay a while. I really wish I had killed the motor, but Sassy, the panting dog next to me would have been pawing me to let her out.
When I made it up to our timber lot, I spotted a male Pileated Woodpecker flying across the road with a large insect in it's beak. It landed near the road, where he was greeted at the door by two large hungry chicks. I was by there later, and waited to see a repeat, but there were two Red-headed Woodpeckers just one tree away. I sure hope I can get some time to spend down there watching them. Not to mention the Bald Eagles.
I spent about a day and half using a machete, chopping brush along the property lines hanging survey ribbon so the logging crew can easily tell where the lines are. This can be a tough job in places where the canopy was opened up 9 years ago at our last select harvest. Both my knees are hurting most of the time, especially my left, which I'll get arthroscopy on Friday. But at one point, I got them both tangled in vines while deep in a thicket, and thought I was going down on my own blade.
Here is a link to a few bird pics posted to my flickr site.
Wow, Dennis, so glad you weren't hurt worse than bad bruises. Hope you mend quickly.
I finally finished (and delivered) a buffet or sideboard I've been building for my mother (and ME, when she's finished with it many years from now!). It is cherry and elm. I modified a plan I found in some magazine. You can see the edge of the cherry table I built her some years ago. As with the table, I embedded a few pieces of Malachite in the buffet. My Dad's hobby was working with stones like that, and I've taken to using the pieces I saved from his shop to add a highlight to some of my work. A few knot holes the cherry and an elm panel in the left door were just asking to be filled with something interesting. I'm not so sure I like it next to the Asian-looking bar she has there, but it looks great with the table. And it is FINISHED and out of my shop! Well, almost; I have to go back in a week or three and rub out the top. She was very excited and I barely got the shelves and drawers in, when she started loading up the little wine racks.
Our older son, who doesn't get over often, spent most of the afternoon Sunday visiting. A nice conversation.
About half an hour after he left, our younger one stopped by. He lives five minutes out of our little town, so we see him and his dog Satch more frequently, but it's nice each time.
Doing final fitting of drawers and installing bottoms. The humidity in the shop has shot up giving me a last minute fitting opportunity at high humidity. I have had to adjust one drawer that became almost tight. I want something like a 1/32" total gap at high humidity. The drawer bottoms are an opportunity to use up bits and pieces of anything that will make a drawer bottom.
Got he sheep sheared. Neither the shepherd nor the sheep are fond of this task.
I really like the look of elm. It has a great chatoyance. It has certain idiosyncrasies when working with it. Paired with the cherry it's just magnificent. That's a nice bookmatched look with the panels.
I can't really see the malachite but that's a clever idea to make it a part of the look to include a remembrance of your Dad to wrap it all together.
Your Mom clearly likes it and is very proud of it, and deservedly so. It's a wonderful piece.
How does one go about embedding a rock in wood and leveling it?
I would prefer postings like this to be separate posting with some description of techniques and more detailed pictures. Better yet would be postings during construction. This interesting piece could get lost in the weekly accomplishments discussion.
I grew up on a farm that was primarily a dairy, but we had about a hundred sheep. They did not appear to like being sheared, but after it was over they seemed very happy and would scamper around and were very frisky. I wondered if they had enough long term memory to be aware of what was happening the second year.
They Shepard did not shear any fingers this year, did he?
Thanks, Yonak. I'll try to take better pictures when I go visit. I only had my phone and we were in a hurry to go out to lunch with someone. The malachite is in the far left door panel and the rail above it. And you are right about elm being sometimes difficult to work with.
Sorry, Bill. I'll try to write up a post or Shop Shot on the piece. It ended up pretty nice. There are some things I don't like about it, but some of that was in the plan itself and I couldn't see in my head how it would work or how to change it.
I have some various sizes of stones in oval cabochons that might have become rings, pendants, pins, etc. I usually find a knot hole that is about the same size/shape and make sure the stone will fit. Then I fill it with some epoxy and set the stone in upside down, so the flat back is up and not quite level with the flat wood. I keep adding epoxy till it is almost level. I go back when that dries and sometimes add more epoxy. When that is dry I sand to make it flat. Then just finish with the rest of the piece. Even though the back of the cab is not polished like the top, the shine comes up when I add finish. I wanted this piece to be durable, so I used water-based poly. I hate poly and normally do not use it, but wanted the piece protected from people who just put their water glass anywhere.
What does that protect you from, the cutter. I remember seeing sheep sheared in Ireland when I visited as a kid. They used those wicked shears people occasionally get stabbed with in bad movies. They had no visible special equipment, and presumable very strong hands.