Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Charging Station

Posts

Charging Station

#1

Charging Station

mdclor

We have clutter on our kitchen counter due to all the charging paraphernalia-power strip & cord, 4 plugs & wires, tablet computer, a couple phones, Kindle, etc. You get the idea.

I am considering making a charging station box to hold/hide the plugs & wires and the rest while they are being recharged. I wonder if the heat generated will shorten the lives of the various devices. Should I plan to include a fan and an opening in the back of the box to let the heat out of the box?

Re: Charging Station

#2

yes!

Mark Mandell - Gone Round In New Jersey

With Li batteries you risk a fire if the item is not able to shed heat properly. Just ask Boeing Aircraft.

Re: Charging Station

#3

Re: yes!

Dave Bair

Only if he's planning to cover the devices themselves. If he's leaving them in the open air (as I do), he should have no heat problems. I would suggest that he use a surge protector strip with an off-on switch; the transformers in the charging units will generate some heat and will continue to use electric energy even when not charging.

Re: Charging Station

#4

Re: Charging Station

Keith Newton

If this is like a kitchen desk, with knee space, maybe a grommet down through the back of the desk top will get all the gear onto a little shelf up under the back of the top. That is what I usually provide for my clients.

Re: Charging Station

#5

Re: yes!

Mark Mandell - Gone Round In New Jersey

I understood this to be a kind of "counter garage" with transformers and devices closed up during charging (hence the fan addition) and/or trickle charged when full.

Re: Charging Station

#7

Re: Charging Station

mdclor

My original thought was to close everything in a box as Mark understood. However, I suppose I could enclose the power strip and plugs and leave the devices on top as Dave suggested.

I think the box would give a cleaner look, but it would mean needing to increase the size to accommodate the fan plus the openings for the air flow. The fans I found on Amazon mostly seem to be 5"x5"x1".

LOML wants a box as small as possible. I don't understand that because we have miles of counter space, but to hear is to obey. :D

Re: Charging Station

#8

Fans *LINK*

Mark Mandell - Gone Round In New Jersey

Search out cooling fans for computer and stereo cabinets such as the link. Lots of options


Cool-er

Re: Charging Station

#9

Another thought...

John in NM

How about a box made of framed pieces of perforated steel? Lots of decorative patterns available. You could also do the top with a nice stone tile, stone is a good conductor of heat so that would help some.

I was also just at the PO in Safford this morning, an older building (as they go out here) with some very nice details. The HVAC registers were at the top of the room (originally forced hot air no doubt), behind some strips of walnut that ran all around the perimeter of the room. You could maybe work a detail like that into masking box ventilation.

Re: Charging Station

#10

Re: Charging Station

Larry in NW Ohio

I have a couple of fans that are around 2 1/2", your welcome to have them if you think they would work for you. I used them for cooling off some kind of electronic devise that isn`t used any more. Larry

Re: Charging Station

#11

Re: Charging Station

mdclor

Thanks for all the replies and suggestions. I think I am going to have to go with Dave's suggestion to keep the unit small enough to make the boss happy. :D Especially since it will be in her domain.