My workshop stereo system includes an Insignia (I know, low end) 5 disk CD changer. I've used it for over a year with no problem, having anywhere from 1 to 5 disks in it. Last week with 4 disks in it I noticed after two or three plays the 4th disk (BB King) was not being played. I removed the first three, opened and closed the unit several times, spun through the platter several times, and peaked in above and below the platter but no disk. Guess I'll have to unplug the unit and take the cover off. Anyone know if this is likely to happen again?
Dust is the likely culprit, so I would adopt blowing out the dust on a regular basis in the future. As far as getting the stuck disc out, I once had the same problem with my Imac at work. Our IT guy suggested fishing it out with a letter opener. I was too chicken to try, but he came down and it worked for him. This might generate an interesting debate on what's the best tool to use if you don't have a letter opener in the shop. Anything long and thin and slightly flexible would probably work.
Good luck. I had a 5-cd changer in my car die with cds in it. Had to take the unit out and dismantle it and then pry it apart to get my cds out. I didn't care since I had to replace the whole unit anyway. But it was a royal pain.
Dust got to my single cd boom box in my shop, too. Now I have a little speaker unit out there that I just plug an iPod into for music. Works great. I just got a used iPod on eBay to leave out there. Couldn't see spending the bucks on a brand new one for that.