Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Rubber Feet

Posts

Rubber Feet

#1

Rubber Feet

Kelly M. Robison

Hi All, I have a project where I'm making a Knife Block for my BH. She wants me to put some small rubber feet [1/4" to 3/8"] size with screws; on it so that it won't slip around on the counter top. I have spent the last hour on the internet trying to find some. I would rather use the type that screw on instead of the ones that have adhesive. I finally found some on one website for $.94 each but they want $6.00 in shipping & handling. I only need 4 each. I checked with my local big box stores and my local Woodcraft store and they don't have anything. Any suggestions????

Kelly in Port Orchard.

Re: Rubber Feet

#2

Re: Rubber Feet

James Heaston EC Ohio

Didja try your local hardware store?

Re: Rubber Feet

#3

Try this

Bill Tindall, E.Tn.

disclaimer: I have no idea if this will work. Put four dabs of silicone on the bottom. Set on wax paper, Squish to level it, let cure.

Or, get some gasket material. Punch a circle out of it. Drill and counter sink a hole in material.

Re: Rubber Feet

#4

Re: Rubber Feet

roger lance

Kelly.....I just bought a set of 4 with screws at Home Depot for $2. Rockler has a similar set for $6.....

Re: Rubber Feet

#5

Try A Local Craft Supply Store Or

Dave's Not Here

I know Lee Valley has them but again, the freight might be prohibitive.

Re: Rubber Feet

#6

I have some I will send you free....

Barry Irby

You pay the shipping, $2, Pay in hundred dollar bills only, no change. :D

Actually, I do have some little gray ones still in the package and I will send you a set if you want them. I can tell you the brand or send you a picture if you care.

Re: Rubber Feet

#7

Re: Rubber Feet 

Lee Schierer in McKean, PA

Go to your local door distributor and get some of the rubber bumpers they install in the metal door frames to prevent doors from banging. Drill a 1/4" hole in the bottom, insert the feet and you are done.

Lee