Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

DeWalt 733 sharpen or buy new

Posts

DeWalt 733 sharpen or buy new

#1

DeWalt 733 sharpen or buy new

Joe in a Cleveland suburb

I now have two sets of horribly dull blades for my planer and no sharp ones.

Looking around the price of sharpening them is about the same as getting new.

I also need to replace the blades on my 6" delta jointer.

Do you buy news, get them sharpened, or sharpen them yourself?

I send my table saw blades to Scott Whiting, but these blades probably aren't worth the shipping.

Thanks.

Ps are they blades or knives?

Re: DeWalt 733 sharpen or buy new

#2

my results differ

Bill Tindall, E.Tn.

Sharpening at Misenheimer is definitely cheaper than buying new Wisconsin particle steel M2 knives. Chinese knives may differ. I bought two sets of knives for my 8" jointer 35 years ago and they are still going strong and will last my lifetime. As I recall it is only a few dollars to sharpen them.

Re: DeWalt 733 sharpen or buy new

#3

Re: DeWalt 733 sharpen or buy new

Jim Pugh

Suggest you contact Cleveland Tool & Cutter in Strongsville for prices. They are a well know local sharpening business and sell other nice goodies besides.

Re: DeWalt 733 sharpen or buy new

#4

Re: DeWalt 733 sharpen or buy new

Barry Irby

I have the Dewalt planer with the knives that can be resharpened (733?) and a 6" Delta jointer. I sharpen the knives for both of them on a 6" grinder I basically leave set up for the purpose. It has an attachment on it that serves as a tool rest and is made for sharpening chisels and plane irons. there is a screw on it that allows you to advance the iron very slowly. I clamp a steel rule on it as a straight edge and slide the knives left to right back and forth across the wheel. I have two sets of knives for each and sharpen both at the same time to keep them all the same width and weight. That way I can mix and match to offset any divots in the blades and do mot have to grind them completely away. I usually pass a diamond hone over them a few times after the grinder. Almost takes longer to type this out than to do it. Sharp knives are worth it.

I would look into the two places suggested above or find a local reputable service to do it for me if I weren't set up to do it myself. I can't imagine you can't find someone to do it cheaper than new ones and make them good as new.

Re: DeWalt 733 sharpen or buy new

#5

like most i sharpin them my self cheeper


Re: DeWalt 733 sharpen or buy new

#6

Re: DeWalt 733 sharpen or buy new

Joe in a Cleveland suburb

Thanks Jim!

Completely forgot about them.

I'll call them.

Gotta love WC! :)

Thanks again.

Joe

Re: DeWalt 733 sharpen or buy new

#7

Re: DeWalt 733 sharpen or buy new

Joe in a Cleveland suburb

Thanks for the replies.

I made the mistake of calling one of those big chain places that cater to WW'ers and based the price on what they told me; $2.00/per inch. Now I know of some other options.

My wife told me my old dull blades are sharper than her husband. Ha ha ha, wait, what? :D

Thanks.

Re: DeWalt 733 sharpen or buy new

#8

Re: DeWalt 733 sharpen or buy new

William Duffield

The DW733 's blades are resharpenable. Note that DeWalt discontinued the DW733 several years ago.

However, the DW734's blades are not resharpenable. They are disposable. You dull them, turn them over and reinstall them. When you've dulled them again, you throw them away or regrind them into other tools, e.g., marking knives. On the outside, the DW734 looks just like the DW733, but the head and blades are different, and it doesn't have tools for setting the blades.