Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

PULLY AND BELT UP GRADE

Posts

Re: PULLY AND BELT UP GRADE

#26

I dont' know that this relates to yours,

Keith Newton

But my 36" bandsaw has 3 - 5/8" belts driving it, and I get some belt scream as you put it, at startup too. But I'm not too worried about it, since they still look fine after 30 years of doing that.

So my advice to you, is to just grit your teeth, and don't buy those 3 belts, until that single one really needs to be replaced, or slips while you are sawing.

Re: PULLY AND BELT UP GRADE

#27

2nd time I got that advise....

Bill Tindall, E.Tn.

So my advice to you, is to just grit your teeth, and don't buy those 3 belts, until that single one really needs to be replaced, or slips while you are sawing.

.......the first time was from the person that recommended buying just one belt. It is what I intend to do and maybe I will never face the 3 belt purchase. That said, were I doing it over the small cost of three belts would lead to a 3 belt purchase.

I ran my Unisaw for several years with 2 belts, one having shredded from age. When I needed to replace the arbor bearings, three belts went back on it.