Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

shop cut-offs are valuable

Posts

shop cut-offs are valuable

#1

shop cut-offs are valuable

Bill Tindall, E.Tn.

They are valuable for more than kindling. For example-


Long relatively thick cut offs can be collected in a waste basket and saved to protect the outside edges of boards during panel gluing. (they go between the clamp jaw faces and the panel)


The thn cut-offs can be saved to be used as shims to fix screw ups, for example loose tenons or dovetails.


End cut-offs can be used to aid set up for edge treatment, for example routing a profile. Additionally, they can be broken to test the glue joint. Feed back of how well the joint was made, as evidenced by how much wood failure occurred when the joint was broken, is useful in developing panel gluing skills.

Can you think of other uses?

Re: shop cut-offs are valuable

#2

Re: shop cut-offs are valuable

David Hay

I use the thin strips that come off the board when ripping to size (those 1/8" or thinner) as shims in various places (cabinets, around the shop, spacers, filling joint gaps). They can also be cut down and used as glue spreaders.

David

Re: shop cut-offs are valuable

#3

Re: shop cut-offs are valuable

Barry Irby

Thin pieces can be used as splines.

Thin strips can be used for bent lamination.

My projects keep getting smaller and smaller until they are gone.

and you can turn those SOB's into BTU's.

Re: shop cut-offs are valuable

#4

Re: shop cut-offs are valuable

BrianMonumentCO

I use offcuts to make small boxes for storing/organizing tools and accessories.

Re: shop cut-offs are valuable

#5

Re: shop cut-offs are valuable

Hank Knight

I use scraps all the time. Hardly a day in the shop goes by that I don't find myself rooting through my scrap bins looking for the perfect piece for whatever it is I'm working on. I can't bear to throw cutoffs away. I look each one over and envision dozens of uses for it - and into the save bin it goes. HOWEVER, there has got to be some way to manage the compulsion to save this stuff. Cut offs and scraps are taking over my shop!

Re: shop cut-offs are valuable

#6

On the one hand...

John in NM

I've always been a saver of these things, especially when they are nicely figured bits of wood. Several years ago I started making a product that is shaped out of a smallish block and have since run through pretty much all the appropriate pieces I've saved and run through a couple friends' supply of scrap as well. That's about the only case where I've ever used up the scrap though.

On the other hand, one thing I found in a production shop is that generally there will always be 4 more scraps for every one you use up :D Most that I'd saved came from that shop. One of the guys there saved all the chunky mesquite scraps with no epoxy for making carne asada :D

Re: shop cut-offs are valuable

#7

Re: shop cut-offs are valuable

Joe in a Cleveland suburb

Jigs. Push sticks. Things like that.

I also find cut offs handy for turning smaller knobs and so on.

I just used some cut offs/scrap to make 6 rolling pins for Christmas gifts too.

Re: shop cut-offs are valuable

#8

Re: shop cut-offs are valuable

Jay St. Peter

They can fill every nook and cranny of your shop. Then fill the entire bed of your truck as you take them to the dump.

Re: shop cut-offs are valuable

#9

Widen a glue-up

Larry Rupprecht

Lots of my wider glue-ups get an edge treatment. Never fails that once the perfect boards are found, the width is 1/8" short of what I wanted. Enter that thin scrap piece that has been standing in the corner like a soldier for months and my glue-up is saved. The shaped edge treatment that follows will usually let the last glue line blend in perfectly and sometimes even enhances the edge appearance.

Has anyone ever figured out the average length of time between the act of tossing and recognizing that one needs that one piece to complete a project? The answer is probably somewhere in the Theory of Relativity......

Larry

Re: shop cut-offs are valuable

#10

Re: shop cut-offs are valuable

David Yoho

Bill I have a barrel a little larger than your trash can in my shop with much the same as what you have pictured. Longer pieces go there to be used when needed. The last need for them was this past summer when my wife needed taller stakes for the tomato plants.

The shorter stuff usually gets put on top of the longer good lumber storage. Recently I've been using up some of the short stuff making small wooden boxes. I've been practicing small box making techniques and have used up a good amount of shorts. In fact, I just dry fitted one yesterday made from some old heart pine that I'm making to house my new Grace slotted screwdrivers from Lee Valley.

I also use scraps for machine setups to check cut depth or profile before cutting the real thing. Since I don't have a lathe, where I could use up more of the smaller stuff, it usually finds its way into the discard bucket.

Re: shop cut-offs are valuable

#11

Re: shop cut-offs are valuable

Tom

I save any nice battens for drawing, or laminating curved elements, banding.

Re: shop cut-offs are valuable

#12

joint testing

Bill Tindall, E.Tn.


The picture shows the two ends cut from the panel that has been glued for the dresser sides. After one end of the panel was trimmed square the cut-offs were broken at the glue joint and I looked for the amount of wood failure compared to glue line failure. In this case there was 100% wood failure indicating the joint is stronger than the wood, whoohoo. that is good

I find this feedback useful in developing reliable gluing technique.

Re: shop cut-offs are valuable

#13

For making a model.....

roger lance

I usually only make one of something.....then go make something else. So basically, I'm always making a prototype and feeling afterwards that I could make it better if there were a next time. This time, I made a little scale model to work out the angles and assembly issues for a shop stool.....saves a lot of headaches working on scrap instead of the real deal.


Hopefully, I'll be sitting at my bench soon....in comfort. :D

Re: shop cut-offs are valuable

#14

So...you would call this a...

Grant in Iowa

STOOL SAMPLE!

AHHHHAAAAAAHAHAHAHAHAHAHA!

I KILL ME!

One of my favorite jokes. Glad it came up naturally and I got to let fly!

Regards,

Grant in Iowa

Re: shop cut-offs are valuable

#15

No.....I'd call it a scale model.....

roger lance

butt I do have a few things I'd call you.

Re: shop cut-offs are valuable

#16

Re: For making a model.....

Robert Fuller

Hey Roger, do you live anywhere near Coatesville, PA? If so, I have a "turntable" (for lack of a better word) from a broken office chair that could be screwed to your chair and allow it to swivel. I was going to use it as a lazy susan for spraying but it is too stiff to turn by hand.

Re: shop cut-offs are valuable

#17

Re: For making a model.....

roger lance

Robert.....thanks for the offer but I'm a goodly distance from you unfortunately.....perhaps you'll make use of it in a chair of your own.....I'll just continue with this basic shop sto....(err sitting devise)....which is my first effort at anything resembling a chair.