Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Review- Lee Valley Grace screwdrivers

Posts

Review- Lee Valley Grace screwdrivers

#1

Review- Lee Valley Grace screwdrivers

Bill Tindall, E.Tn.



Summary: these are the only screwdrivers that I have found that actually fit brass screw slots

Every few years I buy some new brand of screwdriver hoping to find one that actually fits screws. They never do. Why, I wondered, do they make screw slots parallel and screwdrivers tapered?!?

A couple of years ago I tried the Lee Valley brand if screwdriver as well as a box of brass hinge screws. The driver was quality made but tapered and fit the screws poorly. A poor fit strips screw slots. While I have no shame for my house hinge screws I like my furniture screws to look good.

Exasperated I sent a less than cordial note to Mr. Lee ranting that "a company that sold quality screws should sell a screw driver to fit them". I was patiently told that "Dad is working on it".

Alas, with less fanfare than justified, Lee Valley began to sell the Grace screwdrivers. They went on my Christmas list. You can see the result in the picture. Note that the fit on the #4 is so snug that the screw doesn't fall off with the blade vertical. The #6 and 8 have just perceptible clearance. I expect the #3 to be equally fine but an error in my Christmas list didn't result in a #3 under the tree.

Conclusion- If you use brass screws buy these screwdrivers.

Re: Review- Lee Valley Grace screwdrivers

#2

Re: Review- Lee Valley Grace screwdrivers

roger lance

Bill.....recently, on handtool side, I had some discussion of Grace screwdrivers for use on a handgun and also mentioned that LV sold Grace screwdrivers for woodworkers/cabinetmakers.....as it turned out Grace is in my home state of Michigan and I called Grace to get their set of screwdrivers for revolvers.....the man there took my name and address and sent me the screwdrivers without pay.....just said send back a check after you get them.....very unusual.....and very good screwdrivers.

Re: Review- Lee Valley Grace screwdrivers

#3

Re: Review- Lee Valley Grace screwdrivers

Rick Snyder

Thanks Bill for the great tip on grace screwdrivers. Bought the slot and phillips sets.

Re: Review- Lee Valley Grace screwdrivers

#4

Thanks for the review

David Yoho

With that heads up, I will be clicking over to LV to order some next. I don't enjoy using slotted head brass screws for the reason you mentioned. However, since I have a need to use them more than others, those screwdrivers sound like just the ticket for a proper fit.

I have an extensive assortment of brass slotted flathead screws from LV. Another excellent source for quality screws is Horton Brasses.

Years ago I bought a kit of small screwdrivers from LV that I've used for fixing eye glasses and laptop computers. They are very nice because the handles are easy to grasp and the piece on the top turns like the jeweler's screwdrivers do. LV didn't make them but they were good quality. I think they stopped carrying them though.

Re: Review- Lee Valley Grace screwdrivers

#5

Re: Review- Lee Valley Grace screwdrivers

Barry Irby

Have you actually tried them? Do they make a noticeable difference?

Has anyone tried the Phillips version?

There seems to be very little consensus on the exact shape of the slot in a Phillips screw (Or perhaps its the drivers that vary) and having a driver that fits precisely makes a huge difference.

I have reground some flat screwdrivers to as precise a fit as I could get by hand and they were better. They were flat or slightly hollow ground. Never got any that would hold the screw though. That's a neat trick.

Thanks for the review Bill. I will be putting some on my list.

Re: Review- Lee Valley Grace screwdrivers

#6

answers

Bill Tindall, E.Tn.

"Have you actually tried them?" Of course I have tried them. I'm not going to recommend something before testing it for my work.

" Do they make a noticeable difference?" Indeed! The tip stays securely in the slot.

"Has anyone tried the Phillips version?" I avoid Phillips as best I can. The Kline screwdrivers do well in Phillips screws.

Re: Review- Lee Valley Grace screwdrivers

#7

Re: answers *LINK*

Patrick Gibbons

Phillips and pozidrive look the same. But you need to use the right driver for the appropriate screw. The slots in screws are sized specifically to the screw size with a tolerance. Badly made screws can have a slot out of tolerance.


http://sizes.com/tools/wood_screwtbl.htm

Re: Review- Lee Valley Grace screwdrivers

#8

LV Free  Shipping Again !

Don Orr

Watch the left side bar or check the link.

http://www.leevalley.com/US/home/Announcement.aspx

I guess I should have waited to get my set of new Tenon saws. ;-) They are beautiful though.

Re: Review- Lee Valley Grace screwdrivers

#9

my 3 cents, inflation you know

del schisler

could you just grind down your old screw drivers end's to fit the screw's ? than heat up and than dunk in oil to temper them ? just a thought